Jump to content
SAU Community

Custom Coil Pack Covers - Group Buy #2 - Closed


Recommended Posts

love it mate have not put on yet thoe i should ove coz i changed coilpacks to splitfires coilpacks yesterday

but theres sme dirty spots i wanna clean 1st only thing i can say is when you goto put it on cover the shiny side with a rag coz the intake pipe will scratch it if ur not carefull those pipes can be a prick smetimes let alone the heat hope every1 gets theres soon (you will love em) :( really great job brycey umm defianetly use express poste next time alot quicker. :dry:

Cheers

Allan.M

great to hear that your happy with it mate ;) its a great product

yeah definantly be careful with the polished covers, as with any polished product they defect/scratch easy! :D

If you do another one it might be an idea to pick them up and post them your self, that way you know 100% for sure when there done and when there posted.

Any one who buys something that is custom made to order would accept that there might be delays, but it would be annoying to be told that there posted when they have not been.

i was actually thinking this.. getting all the covers sent to me in bulk so i can distribute them myself.. i will have to talk to AM Performance about this as there has been a bit of interest in a 3rd group buy.. i just dont want any extended delays for buyers :D makes me feel on edge, although the package will arrive i just dont like them being late

  • Replies 177
  • Created
  • Last Reply

Top Posters In This Topic

Just wanted to know if I could track my package. I used the number that was posted and here is what I got:

Summary Report

CV069103248AU

Your enquiry has resulted in no details being found for this item.

Edited by JonTurpening
wow missed out big time, who is the manufacturer i might just go n get some from them, unless i can still put one more here somehow !!

go on brycey do another gb and dont feel bad about postage im sure you will get it sorted hey you learn bye trial and error so go for it just my 2c. :worship:

stiiilllllllll haven't got mine yet... I might go ask them wtf is going on with it today... the post office distrubution center is just down the road, where the PO Box is, so I should have got it first :worship:

stiiilllllllll haven't got mine yet... I might go ask them wtf is going on with it today... the post office distrubution center is just down the road, where the PO Box is, so I should have got it first ;)

did the aus post leave any slip at your joint so u can pick it up from the post office?

when i went hme there was a slip on the front door to pick it up from the post office.

No, I have been waiting for it... It would have come into work... I'm heading down now anyways cause I have to send a letter to Sweden and I don't know what it will cost ;)

got mine today, it looks great and that, up close there are a few small blemishes but im still happy with how it looks.

but, for future reference the CA cover i got didnt line up with the holes and there is no way the screws supplied would even reach where they are meant to screw in.

wow missed out big time, who is the manufacturer i might just go n get some from them, unless i can still put one more here somehow !!

sorry mate, these covers were organized between myself and AM Performance for custom group buy only >_<

go on brycey do another gb and dont feel bad about postage im sure you will get it sorted hey you learn bye trial and error so go for it just my 2c. :P

there has been a few issues this time around (mainly postage, there were postage time issues last time around aswell which obviously wasnt sorted out on their end, which is no good) , they will have to be resolved if there is to be a 3rd thats for sure!

No, I have been waiting for it... It would have come into work... I'm heading down now anyways cause I have to send a letter to Sweden and I don't know what it will cost :thumbsup:

did it arrive mate?

got mine today, it looks great and that, up close there are a few small blemishes but im still happy with how it looks.

but, for future reference the CA cover i got didnt line up with the holes and there is no way the screws supplied would even reach where they are meant to screw in.

:D

PM sent, will get this resolved

lol, yeh got mine today, and i have to say it looks like sex :D

heres a couple pics, but my camera is ghey and i had my greasy finger print all over it :D

Picture077.jpg

Picture076.jpg

you really have to see it in real life to see how good it looks, pics ruin it ;)

Edited by sam5709
lol, yeh got mine today, and i have to say it looks like sex :D

heres a couple pics, but my camera is ghey and i had my greasy finger print all over it :D

http://i115.photobucket.com/albums/n295/sa.../Picture077.jpg

http://i115.photobucket.com/albums/n295/sa.../Picture076.jpg

you really have to see it in real life to see how good it looks, pics ruin it ;)

looks awesome mate!! glad you love it :D very suited

Received it. Thanks~~

Not to get off my ass and fit it...

ps. Please leave me feedback

glad to hear you got it :D

feedback left - as with all the buyers :)

Came today :)

Thank you Brycey, I shall leave you a trader rating :P

http://i127.photobucket.com/albums/p122/Sl...83/IMG00103.jpg

great to see you finally got it! looks fantastic

feedback left for you aswell :)

recieved mine today also looks porn

although some of the holes were a little out but went on all gud

cheers brycey

no worries mate :) glad your happy with it! :w00t:

got mine today

http://img266.imageshack.us/img266/5430/dsc00026mj4.jpg

http://img514.imageshack.us/img514/9826/dsc00027ap4.jpg

too bad i just bought me a gtr, i guess its just going to sit up on my room wall!!! unless i sell it with the gtst, but whos going to want that lol

its an expensive plate to have on your wall! haha but i guess a GTR is a suitable upgrade :D

i definately would be keen if there was another group buy, just to let you know... haha

they look good :rofl:

ill have to discuss this with AM Performance.. i will PM you if there is another group buy :)

powdercoated covers are in the post!! :D .. finally :)

post-23734-1196168279_thumb.jpg

post-23734-1196168290_thumb.jpg

post-23734-1196168299_thumb.jpg

post-23734-1196168313_thumb.jpg

post-23734-1196168321_thumb.jpg

post-23734-1196168333_thumb.jpg

Edited by Brycey
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...