Jump to content
SAU Community

Recommended Posts

Well pretty much what the title says, have a few bits and pieces that need fitting and painting and was wondering what Canberra or surrounding area (Yass, Queanbeyan etc) businesses you have dealt with and which you would recommend based on quality and pricing. Also looking for some Window Tinting aswell, who would you recommend.

If possible could you give a rough estimate on prices aswell, looking at:

Window tinting in 35% black (Door windows, quarters and rear)

Front lip fitted and painted in white

Side skirts fitted and painted in white

Rear pods fitted and painted in white

Spoiler wing blade and end caps painted in black

and also some touch up paint on bonnet and rear wing to fix some stone chips and marks

Cheers for any help

Edited by Baconer

Think i've heard Mac's in Quenbeyan mentioned before for window tinting, any idea on the prices?

Remember hearing a story on the forums about Neugel doing the dodge on someones bonnet and leaving scuff marks, anyone else have good things to say about neugel? Hopefully it was just a one off

give newgel a call. everone i've spoken to who has had work done there came out quite happy

I won't ever be taking my cars there again... i had my front bar, side skirts and rear bar resprayed when i had my skyline and on certain angles with certain lights it came out looking like a dull black as opposed to the standard glossy black like i am not talking a little off which i would have been ok with this was almost a completly different colour... So let's just say i am not happy with the work they did :blink:

Solartint in belconnen did my car for 350$, had a few cars done there, never had a problem.

:X $350 seems like a bit much, have been told that anything over $280 is too much to pay as even with parts and labour it shouldnt add up to that, so an extra $70, do you get a bit of a cuddle afterwards :dry:

:X $350 seems like a bit much, have been told that anything over $280 is too much to pay as even with parts and labour it shouldnt add up to that, so an extra $70, do you get a bit of a cuddle afterwards :dry:

meh well I thought it was reasonable, and like I said, never had a problem, , plus their pretty much local to me. I'll be going back to em for my next car.

:X $350 seems like a bit much, have been told that anything over $280 is too much to pay as even with parts and labour it shouldnt add up to that, so an extra $70, do you get a bit of a cuddle afterwards :dry:

I think you're forgetting he has another two windows more than you do. :D

Besides, who have you been 'told' by? ..Don't forget there is a difference in the quality of the materials used as well.

Otherwise,

I've seen nothing but good recommendations for Solartint.

I'll be getting my windows for my S13 done through Solartint, been quoted $290 all round for either ONYX or CHARCOOL film (60% heat rejection).

Lifetime warranty (non-transferable) against bubble, peel or crack and 99% U.V. protection. They are all as dark as legal. (35% VLT)

Also, advice regarding JRacing and NewGel.. Don't go there asking for price quotes and then argue with them and haggle the price down and still expect a perfect job.

Either accept their prices or go elsewhere; reduce the price and you reduce their service and quality.

Seen too many examples of people haggling the prices and then complain about getting an unsatisfactory job.

One other thing to keep in mind, I have had no personal experience with any of this stuff yet.. I'm basing this off from the people I know and their experiences.

Perhaps check out this thread too - http://www.nissansilvia.com/forums/index.p...howtopic=259529

Edited by Ecstasy
Besides, who have you been 'told' by? ..Don't forget there is a difference in the quality of the materials used as well.
One other thing to keep in mind, I have had no personal experience with any of this stuff yet.. I'm basing this off from the people I know and their experiences.

So basically you are having a dig at him for saying he has been told by a friend and then you go on to say you have no personal experience with any of this and have been told by a friend yourself... seems a bit hypocritical...

I have had my SSS Pulsar tinted by solar tint in Fyshwick before and one of my power window stopped working afterwards. They accepted no responsibility for it either which was annoying as it was working perfectly before they were given the car... luckily it was just the contacts on the winder must have got some water on it when they were cleaning the window and after it dried out it started working again... I will still go back to them though as that sort of stuff i figure can happen.

Also in regards to tinting I have been quoted my front two windows will be $50 each so $100 in any tint I want except for the special stuff so I wouldn't say <$280 is unreasonable considering he has a two door. Are you only getting the front two windows and the rear quarters done ???

So basically you are having a dig at him for saying he has been told by a friend and then you go on to say you have no personal experience with any of this and have been told by a friend yourself... seems a bit hypocritical...

No, not really having a dig at him at all.

Just wanted to point out those factors to consider.

At least I expressed that I've had no experience rather than giving a false impression that I have otherwise.

Haha didn't take the extra windows into account, makes sense :whoops:

Forgot to mention that im just after sides and rear (including quarters) in 35% tint

As for haggling prices, i never mentioned anything relating to this :X All i was asking for was personal reviews on different local businesses in regards to prices and quality of work so i could make a decision on where i should head.

Nah just wanted to mention it, as understandably it can leave a bad impression on someone and skew people's views without taking in the whole picture.

I've heard a lot of negative comments about various bodywork places in Canberra from people and have seen the results for myself.

But quite often, you don't tend to see the whole picture; realise what's actually going on and see it from the other side's perspective on the situation. :whoops:

By the way, here is the official NSW RTA article regarding window tint - www.rta.nsw.gov.au/registration/downloads/vsi/vsi03_rev3.pdf

Edited by Ecstasy
Think i've heard Mac's in Quenbeyan mentioned before for window tinting, any idea on the prices?

$220 both times from memory, i also scratched the shit out of the tint on one of my windows a couple of years ago, havnt had any dramas with bubbles and peeling

If they needed to do the car twice, how good are they? more info needed maybe.

I had them tint it to a level that dickson didnt really like, so i took it off and got a more legal level put on after i passed. no question about quality in my eyes, as i said above, its top quality

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...