Jump to content
SAU Community

The New Look

redevil

By redevil,
in Queensland

 Share

Recommended Posts

redevil Proficient

redevil

Posted
Posted (edited)

Ok well had my car fully done with the veilside kit and chrome rims and all the other show stuff and turned alot of heads. But due to me getting side swipped earlier this year it gave me the oportunity to give it a whole new look and change it up a bit. So it started about june this year, took it down to the boys at the panel shop fully strip it down to nothing and start the new body work, role the rear guards, shave the aerial, side indicators and boot, fit m3 mirrors, customize the combat R rear bar, Drift wing, Bomex Sides, Do-Luck GTR front, GTR aluminium bonnet, Widen front guards, custom 2 tone paint with diamondesque pearl and a couple of other suttle things that'll be my secret. Then straight from the panel shop down to my mates tyre show for some AXIS Hiro rims to be fitted, then drive it for 1 week and then straight of to have the engine removed and fully rebuilt, which is were it is now. From there it'll be going to get the interior and stereo done.

So let me know what you think....

post-9866-1191294520_thumb.jpg

post-9866-1191294557_thumb.jpg

post-9866-1191294569_thumb.jpg

post-9866-1191294576_thumb.jpg

post-9866-1191294591_thumb.jpg

Edited by redevil
Link to comment
https://www.sau.com.au/forums/topic/187560-the-new-look/
Share on other sites
redevil Proficient

redevil

Posted
  • Author
Posted (edited)

yeah engines at the engineers with debate going whether to go 25 bottom end or 30..... but yeah working it out with him wats goin to be the best package probs going to go the 25 bottom due to his racing experience.....

now trying to work out how to design my dash with the guages and stuff, and also wat to get airbrushed on it :S

also is there a difference between series 1 and 2 when it comes to tomei poncams

Edited by redevil
Link to comment
https://www.sau.com.au/forums/topic/187560-the-new-look/#findComment-3385554
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...