Jump to content
SAU Community

Recommended Posts

Supersprints and Hillclimbs are different to commercial track days as they are full, CAMS sanctioned speed events.

Supersprint:

Timed runs (normally 1-3 laps) around a race track with 2-4 other cars. You will be timed within your class.

Hillclimb:

Timed runs up along a track/road (up a hill!), one car at a time.

Any CAMS event will make "supplementary regulations" available which will explain the requirements. In general, you just run your road car with the following:

* Fire extinguisher mounted in the cabin (about $40)

* "Secondary Bonnet Tie Down" - any simple rope/strap that holds your bonnet closed in addition to the normal catch

* Blue triangle on the car pointing where your battery is (can just use electrical tape)

* your competition number on the side (can also just be tape)

These changes are all pretty simple and should not need to be permanent mods to your car.

You will need:

* Full face helmet

* Neck to foot clothing

* CAMS L2S license, currently $91 thru CAMS or the club.

More detail from the cams site is here:

http://www.cams.com.au/content.asp?PageID=...rted&ObjectID=6

There are regular drag races at Eastern Creek on Wed nights from 3pm-10pm. If you get there around 3 you should be able to have 4-5 runs in that time.

Bring along:

* Registered car, bring along rego papers (and a letter confirming you can run if the car is owned by a company)

* Driver's license

* helmet

* long clothing

Full details are on the Eastern Creek site:

http://www.eastern-creek-raceway.com/offstreet.htm

Full circuit racing is a bigger comittment than hillclimbs and supersprints.

To drive you need:

* Helmet

* Race suit

* Race boots

* Fireproof socks

* optional fireproof balaclava and underwear(!)

* CAMS L3 license or higher (requires approved observed license test, eg thru race driving course, flags lecture, medical exam) current cost is $465.

You can get hold of the racing gear from shops like Race and Rally

As for your vehicle, you can either lease a prepared car for a race, or put it together yourself. CAMS have full details of the requirements for each category.

  • 1 month later...

My thoughts on the subject....

If you are sensible about it you can take any car on the track. Just drive it within it's limits and your's.

The idea of a track day is different for everyone. I go out there to drive fast in a safer (and legal) environment to the road. I do a few hot laps and then let the car cool down. Tyres, brakes etc can cop a beating on the track IF YOU DON"T LOOK AFTER THEM.

A brief checklist I do:

Bleed brakes before every track day.

(Using DOT 5 or higher fluid in brakes)

Check condition of brake pads (more than 1/2 left is a guide).

Check cond. of tyres and inflate to correct pressure.

Check all wheelnuts torqued to correct spec.

Change engine oil (usually coincides with oil change time anyway).

Check all other fluid levels.

Visually check (and do the grab and shake check) suspension for any obvious problems.

Now if you think about it they are all things you should be doing anyway, even if you are only driving a car on the road....

Frank Williams does NOT use track days to recruit drivers so there's no point pushing it. Wait until you get familiar with the track/car/yourself before trying for the lap record.

Everyone should do it at least once in their life.

:D

  • 4 months later...

If you're serious about supersprints it's also worth getting a spare set of wheels and fitting them with street legal competition rubber such as Dunlop DR01's (or 02's) or Bridgestone Potenza 540's. They're worth atleast 2 seconds a lap on most circuits.

Gordon Leven Tyres at Emu Plains sells Bridgestones and Gary's Race Tyres at Blacktown sells the Dunlops. My 540's are 235x45x17 and cost $360 each.

Of course, if you're prepared to buy competition rubber you'll get the most out of it if you install a suspension kit as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...