Jump to content
SAU Community

Recommended Posts

i have a couple friends who use taio's turbos. tr43, tr44, and the new tr29. these were on ca and sr motors.

the only disadvantage is they're not bolt on, and you'll need to get a manifold and/or dump.

my mates are happy with them and havn't had any problems. taio is a cool guy who is also willing to help out if needed.

Nice.. keep the information coming. Id like some info of how they have gone on an RB25 though..

If i get one for my RB25 with the Internal gate that it comes with, what do i need to do to fit it..?

I was told i need a V-Clamp separate...

here's a TR43 on 14psi making 250kws wheels on stock rb25 engine.

r33250kws.JPG

And here's our sponsored R32 drifting with 190kws on 10PSI on TR43 at calder

And here's Our Sponsored S13 CA18det drifting at Winton with 250kws on 16PSI running TR43HF turbo.

Enjoy the show :) And please don't hesitate to pm/contact me if any information is required. Thank you all guys.

here's a TR43 on 14psi making 250kws wheels on stock rb25 engine.

r33250kws.JPG

And here's our sponsored R32 drifting with 190kws on 10PSI on TR43 at calder

And here's Our Sponsored S13 CA18det drifting at Winton with 250kws on 16PSI running TR43HF turbo.

Enjoy the show :P And please don't hesitate to pm/contact me if any information is required. Thank you all guys.

hmm interesting.. thinking bout giving garret a miss this time round. so ill need a different manifold. u got a kit for SR20?

For RB20 we can supply you the full kit of:

Tr43 440HP turbo (250kws wheels)

high mount T3 manifold

38mm external wastegate

braided oil feeds

dump pipe bend and fittings

total: $1550

Add $50 more we can high flow this turbo to 500HP (300kws wheels)

when can we expect full boost for the non high flow and high flow turbos?

is it very responsive with the setup mentioned above for both highflow and non highflow?

cheers mate

edit: for rb25

Edited by Phantom32

For the TR43 standard on RB25det, turbo will respond from 2000 RPM and kick in full 20PSI at 4000RPM. This is a very responsive and torquey turbo that we recommended to drifters. The high flow will be around 300 RPM less in responds (2300 to 4500 RPM from 0 to 20PSI), It can hold upto 25PSI of boost, and will give you massive mid to top end power. Should be getting around 270ish with TR43 standard on RB25det and over 300KWs with TR43HiF turbo.

For RB20 we can supply you the full kit of:

Tr43 440HP turbo (250kws wheels)

high mount T3 manifold

38mm external wastegate

braided oil feeds

dump pipe bend and fittings

total: $1550

Add $50 more we can high flow this turbo to 500HP (300kws wheels)

That is a really great price.

Well, for warranty side we follow the warranty and service guide from Garrett. Its called "Turbo and CAC Fundamentals". The warranty will be void: due to Liburication issues, foreign object damage issues and faulty workmanship. I have uploaded a copy at:

http://www.digi-hardware.com/TurboCACFundamentals.zip

Its a 96MB file which contains detailed information on turbo installation, trouble shooting and damage analyse.

To install on a RB25 its best to get the TR43 full kit at $1550 including manifold, ext wastegate, Turbo, oil feed, and dump pipe.

To install on a RB25 its best to get the TR43 full kit at $1550 including manifold, ext wastegate, Turbo, oil feed, and dump pipe.

Thats a really good price for a whole kit.

Does it have to be high mounted?

It can't be low mounted on the stock manifold?

And isn't the TR43 internally gated eliminating the need for an external wastegate?

Or its just better to go for the kit for the best results?

Sorry for all the questions man :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...