Jump to content
SAU Community

'hyper Gear' Turbo's

Dean_HR31

By Dean_HR31,
in General Automotive Discussion

 Share

Recommended Posts

dmr Mentor

dmr

Posted
Posted

i have a couple friends who use taio's turbos. tr43, tr44, and the new tr29. these were on ca and sr motors.

the only disadvantage is they're not bolt on, and you'll need to get a manifold and/or dump.

my mates are happy with them and havn't had any problems. taio is a cool guy who is also willing to help out if needed.

Dean_HR31 Mentor

Dean_HR31

Posted
  • Author
Posted

Nice.. keep the information coming. Id like some info of how they have gone on an RB25 though..

If i get one for my RB25 with the Internal gate that it comes with, what do i need to do to fit it..?

I was told i need a V-Clamp separate...

hypergear Grand Master

hypergear

Posted
Posted

here's a TR43 on 14psi making 250kws wheels on stock rb25 engine.

r33250kws.JPG

And here's our sponsored R32 drifting with 190kws on 10PSI on TR43 at calder

And here's Our Sponsored S13 CA18det drifting at Winton with 250kws on 16PSI running TR43HF turbo.

Enjoy the show :) And please don't hesitate to pm/contact me if any information is required. Thank you all guys.

markimak Grand Master

markimak

Posted
Posted
here's a TR43 on 14psi making 250kws wheels on stock rb25 engine.

r33250kws.JPG

And here's our sponsored R32 drifting with 190kws on 10PSI on TR43 at calder

And here's Our Sponsored S13 CA18det drifting at Winton with 250kws on 16PSI running TR43HF turbo.

Enjoy the show :P And please don't hesitate to pm/contact me if any information is required. Thank you all guys.

hmm interesting.. thinking bout giving garret a miss this time round. so ill need a different manifold. u got a kit for SR20?

hypergear Grand Master

hypergear

Posted
Posted

For RB20 we can supply you the full kit of:

Tr43 440HP turbo (250kws wheels)

high mount T3 manifold

38mm external wastegate

braided oil feeds

dump pipe bend and fittings

total: $1550

Add $50 more we can high flow this turbo to 500HP (300kws wheels)

Phantom32 Experienced

Phantom32

Posted
Posted (edited)

when can we expect full boost for the non high flow and high flow turbos?

is it very responsive with the setup mentioned above for both highflow and non highflow?

cheers mate

edit: for rb25

Edited by Phantom32
hypergear Grand Master

hypergear

Posted
Posted

For the TR43 standard on RB25det, turbo will respond from 2000 RPM and kick in full 20PSI at 4000RPM. This is a very responsive and torquey turbo that we recommended to drifters. The high flow will be around 300 RPM less in responds (2300 to 4500 RPM from 0 to 20PSI), It can hold upto 25PSI of boost, and will give you massive mid to top end power. Should be getting around 270ish with TR43 standard on RB25det and over 300KWs with TR43HiF turbo.

SilverECR33 Veteran

SilverECR33

Posted
Posted
For RB20 we can supply you the full kit of:

Tr43 440HP turbo (250kws wheels)

high mount T3 manifold

38mm external wastegate

braided oil feeds

dump pipe bend and fittings

total: $1550

Add $50 more we can high flow this turbo to 500HP (300kws wheels)

That is a really great price.

hypergear Grand Master

hypergear

Posted
Posted

Well, for warranty side we follow the warranty and service guide from Garrett. Its called "Turbo and CAC Fundamentals". The warranty will be void: due to Liburication issues, foreign object damage issues and faulty workmanship. I have uploaded a copy at:

http://www.digi-hardware.com/TurboCACFundamentals.zip

Its a 96MB file which contains detailed information on turbo installation, trouble shooting and damage analyse.

To install on a RB25 its best to get the TR43 full kit at $1550 including manifold, ext wastegate, Turbo, oil feed, and dump pipe.

RBwhatever Veteran

RBwhatever

Posted
Posted
To install on a RB25 its best to get the TR43 full kit at $1550 including manifold, ext wastegate, Turbo, oil feed, and dump pipe.

Thats a really good price for a whole kit.

Does it have to be high mounted?

It can't be low mounted on the stock manifold?

And isn't the TR43 internally gated eliminating the need for an external wastegate?

Or its just better to go for the kit for the best results?

Sorry for all the questions man :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • bilbo117
      Gtr-registry.com: Now All R32/r33/r34 Gtr Details - Full Registry - Submit Photos/info

      By bilbo117 · Posted

      Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...