Jump to content
SAU Community

Recommended Posts

  • Replies 241
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 2 weeks later...

your probably wondering since the bumper is fitted, but the lower lip or diffuser is missing. like i mentioned, thats just a fiberglass version for test fitting.. this is the bumper going on the car before paint:

All OEM parts here.

n48908763_34239070_5079.jpg

I need some R34 help here.. gtt or gtr... how does the rear bumper mount to the rear end? is there small clips? or screws...

where can i find this info from..

Edited by mwracing

let me know how the lower lip will fit.

Been looking for the lower lip to finish my one off but i'm not sure how it'll fit, if it will hit onto other things under there.

Thats been holding me back, and the cost to get a genuine one.

here is some more pics from today.

Front bumper arrived from ZENITANI_GTR

Image033.jpg

took some pics of the hard fitment work needed to look seemless

Image032.jpg

still in the works...

Image031.jpg

Image028.jpg

Image029.jpg

Image030.jpg

pretty soon it will look like this... just before paint.

P4020190-1.jpg

Damn - there's some high quality workmanship going into this. I reckon it'd look awesome if you left it without the big GTR wing and just put a little lip spoiler or something instead. It does take away from the GTR thing, but it'd look hot.

  • 3 weeks later...
Im thinking of turning my 34 into a 32 lol... :cool:

Seriously mate, nice work. i've subscibed, looking forward to seeing the finished product as im sure you are too!!!

haha should have told me;) we could have traded parts :laugh:

  • 2 weeks later...
Ah! Psyched me out. I saw that there was a reply by you and thought it was an update! Damn it! :P

ok here is one just for you.

mate that looks awsome, is it possible to use the r34 gtt rear on an r32 gts without it looking out of proportion at the back?

the r34 gtt i guess will work just the same but it will not look as good :D

Lookin great so far. Cant wait to see the finished product! :rofl:

getting there...

here are some new photos..

Before:

Image032.jpg

IMG_1377.jpg

after:

trunk and rear end is 95% complete.

Image012-1.jpg

Image011-1.jpg

Image056.jpg

Image008-1.jpg

Image009-1.jpg

Image005.jpg

Image003.jpg

Image002-1.jpg

Image004.jpg

Image014-1.jpg

The amount of hours spent working ont his car must be herendus!

So far all the alignment is looking awesome!

Amazing work by the garage!

Only cirticism is that the rear brake light covers dont seem to be aligned properly.. the S shaped bit that sits with the back of the "trunk"..

Habe a look at the pics on this page then the way they sit on the matte black 43 below it..

I suppose its easy to comment..

But in all seriousness.. thats an awesome build with awesome work..

The amount of hours spent working ont his car must be herendus!

So far all the alignment is looking awesome!

Amazing work by the garage!

Only cirticism is that the rear brake light covers dont seem to be aligned properly.. the S shaped bit that sits with the back of the "trunk"..

Habe a look at the pics on this page then the way they sit on the matte black 43 below it..

I suppose its easy to comment..

But in all seriousness.. thats an awesome build with awesome work..

i see what u mean, the S bend from the taillights where it meets the inside section of the trunk panel...

it should be straightened out when parts are bolted on, the parts were just test fitted, and placed on.

So the car comes off the road, some parts are tentatively sold, some are completed sold. but thats another thread.

Here is the Current Specs on the car:

1989 Nissan Skyline GTR

89,000kms

Strong RB26 at compression Check (160-160-160-160-165-170)

NISMO Adjustable Coilovers

NISMO Front and Rear Strut Bars

NISMO LMGT'3 with Advan A048's(sold)

NISMO N1 Front bumper

NISMO Twin Plate (slipping)

NISMO Downpipe

NISMO R32 N1 Turbos 14411-06U00 600HP

HKS High Power Catback (no cat)

BLITZ Air Filter Pods

IMPUL Ecu (looking to sell to get PowerFC with Commander)

APEX'I AVC-R Boost controller (currently @ 1.0Bar)

BLITZ VGTT (Voice guided Turbo Timer)

JDM Grounding Kit

Escort Passport SR7 plus Shifters ( $2000 Radar Jammer )

Pioneer AVHP6800 6 disc dvd player with:

-Bluetooth

-Vehicle Dynamics

Compustar 2-way Alarm

Innovative Motorsports LMA-2 with RPM kit

Blazt consult interface

White Face Gauges

List of parts ready for the conversion: over 11K in OEM parts from Japan

R34 GTR OEM Aluminum Hood

R34 GTR OEM non-xenon Headlights

R34 GTR OEM Front Bumper with lip

R34 GTR OEM Front Air Diffuser

R34 GTR OEM Front Grille emblem

R34 GTR OEM Front Marker Lights

R34 GTR OEM Z-tune Sideskirts

R34 GTR OEM Z-tune Rear bumper Skirt

R34 GTR OEM Rear Bumper

R34 GTR OEM Rear Tailllights

R34 GTR OEM Trunk

R34 GTR OEM Trunk brake light

R34 GTR OEM Factory Metal Quarter Panels

R34 GTR OEM Metal behind taillights Panel

R34 GTR OEM Back up Lights

R34 GTR OEM Trunk Weather Seals

R34 GTR OEM Red Valve Covers

R34 GTR OEM Nur Engine Ornament

R34 GTR Fiberglass Spoiler

R32-R34 Fiberglass Conversion Fenders

Replica LMGT4's with 265/35/18 Advan Neovas

Pictures Will be updated as removed or installed.

thanks for looking,

One year of buying parts has almost finally paid off.

Hey Hows it going man, I live in canada, well Quebec, I have a R32 GTR and I'm planning on doing the same thing as you but different, what I'm asking is what website or provider did you use to get your parts, because I have a bunch of Japanese and American Sites, but the trunk is carbon fiber and so is the hood and stuff, and also the lights arn't included. I have a gerneral Idea of what I'm going to do with the front, but it's the back i'm worried about, I have to cut part of the back to get the trunk to fit good. Anyways if you can give me your provider via pm or on this post would be great.

What I need to know is where you got your

R34 GTR OEM Front Marker Lights(Flashers Yellow Light?)

R34 GTR OEM Rear Tailllights

R34 GTR OEM Trunk

R34 GTR OEM Trunk brake light

R34 GTR OEM Metal behind taillights Panel

R34 GTR OEM Back up Lights

R34 GTR OEM Aluminum Hood

R34 GTR OEM non-xenon Headlights

R34 GTR OEM Rear Tailllights

Thanks again man I hope you can answer me, cuz I'm tired of googleing and stuff to find a provider, thanks

Shawn

hey man hows it going with the conversion?

i was lookin at gettin an R32 GTR for my p's and doing something simiular..... r34 interior n stuff

ideas abandoned since the old mans gettin an R35

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...