Jump to content
SAU Community

Recommended Posts

Ok, so my PFC's numbers are:

PFC RB26 9801 - 0021

Is there another number I should be looking for to ID the model number? If it is the correct one for mine i'll take it.

http://paulr33.sauvic.com.au/docs/powerfc-...erfc-faq.htm#70

It basically says in this FAQ, to check the sticker / product code on the side of the powerfc unit and check it against the apexi table in the link on my first post....eg. pfc product code "RB26" = commander "FCC NT" this is for the BNR32, for a BNR33 (R33 GTR), the product code on the side of the pfc box should be "GTR33" which on the table shows you can use either the FCC NT or FCC3. So best thing to do is check your pfc code and match it up on that table.

Id say your in the same boat with me Vspec R33 if it says RB26 on the side of your powerfc unit.

Cheers!

Gagz

Edited by R31 Gagz

Likely... I just tried an FCC3 controller from an RB25DET Power FC and that didnt work... It just locked up at the apexi screen. Didnt even report a version number. I guess I have an old one too. There was no mention of R33 GTR on it anywhere, althogh one of the stickers was 1/2 damaged so it wasnt readable.

I have an S14A......

On the side of the box it says 414-N016. And the model serial # is PFC SR2016.

So goin by the Apexi site it says I can either use the FCC FN or FCC3 correct????

Therefore this commander can work on my s14A, right?

I have an S14A......

On the side of the box it says 414-N016. And the model serial # is PFC SR2016.

So goin by the Apexi site it says I can either use the FCC FN or FCC3 correct????

Therefore this commander can work on my s14A, right?

Yes it would be fine for yours.

Suitable for an R34 GTT??

Going by the chart for RB25DETs in the 34s, you have to use an old type like mine for some reason.

Are you interested then XQZIT?

Cheers!

Gagz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...