Jump to content
SAU Community

Recommended Posts

Howie,

google spread spectrum radio - that will give you some idea how quicktrak works. your idea will slow a few of them down but not that one.

I have $35m of ferries insured with that system with 3 more to go (contract completes 2009.) so its a VERY reliable system.

APS,

i see you are talking to gary. top bloke.

ah nice one chris, i'm used to seeing gps systems hastily put together nice to see quicktrak uses something a little more resilient.

Guys i just installed a quicktrak alarm system in without a gps function as ive been told its pretty advanced...ive taken someones advice here and called Daniel from platinumppi.com and his VERY GREAT. I would highly recommend him to anyone who would want to install an alarm system. Very clean and hiding all wires under dash with great care. His number is 0411101737

  • 1 month later...
Guys i just installed a quicktrak alarm system in without a gps function as ive been told its pretty advanced...ive taken someones advice here and called Daniel from platinumppi.com and his VERY GREAT. I would highly recommend him to anyone who would want to install an alarm system. Very clean and hiding all wires under dash with great care. His number is 0411101737

hw much does it cost u for the quicktrak alarm system?

in my books - autowatch $700 fitted.

mongoose - $550-575 fitted depending on car.

put it this way I'm currently working on a $4m ferry that the security is quiktrak based. now there are 13 of these things running around , you do the math.

the system keeps them intact and the $30k or so of gear in them in place. I'd say iQT does the job nicely.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...