Jump to content
SAU Community

Recommended Posts

yeah i'm gonna be having a bbq, i don't care about the weather

it'll most likely be hot anywayz :P

i might have moved by my birthday, or at least will be trying to find a place, so i dont really know what ill be doing.

im bored also, watching MPU.

What kind of power can set of GTR rods handle?

Hopefully at least 350awkW. I say this because I have left standard R32 GTR conrods in my engine rebuild on advise from Peter Hall (formally from Willall Racing). However, I did purchase Tomei conrod bolts & CP forged pistons and the conrods were all tested prior to putting the engine back together.

but can a rb20 pull same power as rb26/30 :P ?

So yeh...how much for rb30e rebuild ???

Of coarse it can, but it will be super laggy.

Rb30e rebuild; 7-7.3k rev limit ~2.5k.

rb30e 8.5k revlimit ~5k.

Darren has pushed his stock rb30rods to 470rwkw with a 7k rev limit. :P

Of coarse it can, but it will be super laggy.

Rb30e rebuild; 7-7.3k rev limit ~2.5k.

rb30e 8.5k revlimit ~5k.

Darren has pushed his stock rb30rods to 470rwkw with a 7k rev limit. :P

Thats why im keeping my rb30e bottom end stock :P cant wait till my rb25/30 is all done might put it in a sleeper vl with hub caps and a I LOVE JESUS sticker

Thats why im keeping my rb30e bottom end stock :rofl: cant wait till my rb25/30 is all done might put it in a sleeper vl with hub caps and a I LOVE JESUS sticker

So u just going to leave the block as it it (and im assuming it came out of a 250k+km car...)...????

Of coarse it can, but it will be super laggy.

Rb30e rebuild; 7-7.3k rev limit ~2.5k.

rb30e 8.5k revlimit ~5k.

Darren has pushed his stock rb30rods to 470rwkw with a 7k rev limit. :rofl:

A workshop offered me a rebuilt rb30 bottom end (standard rebuild) for 1k...and its an expensive workshop... Am i missing something ?

check this for a LOL

http://www.prostreetromania.ro/prostreet.htm

nfi if its a repost...

that was so funny

Yeh that is quite a funny website......... BUT DAYUM I want in on some of that Romanian beauty!!

just for Darren Romanian Beauties

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...