Jump to content
SAU Community

Recommended Posts

yeah i'm gonna be having a bbq, i don't care about the weather

it'll most likely be hot anywayz :P

i might have moved by my birthday, or at least will be trying to find a place, so i dont really know what ill be doing.

im bored also, watching MPU.

What kind of power can set of GTR rods handle?

Hopefully at least 350awkW. I say this because I have left standard R32 GTR conrods in my engine rebuild on advise from Peter Hall (formally from Willall Racing). However, I did purchase Tomei conrod bolts & CP forged pistons and the conrods were all tested prior to putting the engine back together.

but can a rb20 pull same power as rb26/30 :P ?

So yeh...how much for rb30e rebuild ???

Of coarse it can, but it will be super laggy.

Rb30e rebuild; 7-7.3k rev limit ~2.5k.

rb30e 8.5k revlimit ~5k.

Darren has pushed his stock rb30rods to 470rwkw with a 7k rev limit. :P

Of coarse it can, but it will be super laggy.

Rb30e rebuild; 7-7.3k rev limit ~2.5k.

rb30e 8.5k revlimit ~5k.

Darren has pushed his stock rb30rods to 470rwkw with a 7k rev limit. :P

Thats why im keeping my rb30e bottom end stock :P cant wait till my rb25/30 is all done might put it in a sleeper vl with hub caps and a I LOVE JESUS sticker

Thats why im keeping my rb30e bottom end stock :rofl: cant wait till my rb25/30 is all done might put it in a sleeper vl with hub caps and a I LOVE JESUS sticker

So u just going to leave the block as it it (and im assuming it came out of a 250k+km car...)...????

Of coarse it can, but it will be super laggy.

Rb30e rebuild; 7-7.3k rev limit ~2.5k.

rb30e 8.5k revlimit ~5k.

Darren has pushed his stock rb30rods to 470rwkw with a 7k rev limit. :rofl:

A workshop offered me a rebuilt rb30 bottom end (standard rebuild) for 1k...and its an expensive workshop... Am i missing something ?

check this for a LOL

http://www.prostreetromania.ro/prostreet.htm

nfi if its a repost...

that was so funny

Yeh that is quite a funny website......... BUT DAYUM I want in on some of that Romanian beauty!!

just for Darren Romanian Beauties

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
×
×
  • Create New...