Jump to content
SAU Community

Recommended Posts

snapped a bolt in the f**king shit ass just jap cooler were the brackets mount coz the crap quality SHIT..

did the same on mine when i tightened the bolt up. its not the cooler thats shit quality, its the bolts they supply

lessons learnt when buying cheap stuff, always replace the bolts with good stuff

morning all :)

one more weekend till i can clear out my wardrobe and put all that damn stereo gear into the patrol :bunny:;):D

Can someone who has a R32 or 33 Manual do me a favour?

In the Service Data and Specifications for the braking system (at the end of the Brake section) there is a Split Point in kPa and a reduction ratio in the Data for the Brake Master cylinder. For the S13's it's: 3.932 (39.2, 40, 569) x 0.4.

Could some one let me know what they are for either an R32 or R33.

Thanks

took my turbs off, turns out its a hi flowed vg30.

good nic too.

captain thread comes out monday, then i gotta put it all back together....

GO THE HAWKS!

checking shaft play is only half of the story about telling whether a turbo is in good nick or not, Another way of checking is actually looking at the whole rear wheel of a turbo, a mate recently bought a gt3540 off a typhoon from ebay, shaft play was in top shape, and the wheels looked fantastic, Taking the rear housing off told a different story. The whole rear of the wheel was chewed away leaving a very f**ked turbo. from the outside the wheel looked to be in top shape. Obviously your is fine craig lol i just wanted to tell a story lol.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...