Jump to content
SAU Community

Recommended Posts

Vu,

Did you pull the squeel shims off the old brake pads and clipped them on to the new? 'Sometimes' its easy not to see the squeel shims on the old pads if they are dirty and full of brake dust.

Had a mechanic fit the brake pads and rotors up and yeah he did the shims - everything looked to be done well and bedding in was done according to the instructions from the brake pads. I'm gonna take the pads out sometime in the next couple days get some anti-squealing shiz into it see how it goes then... damn thing is driving me nuts!

yeah my EBC Redstuff (ceramic) is doing the same thing now....loud as with a medium pedal but goes away with hard braking and I used the stick on anti squeal pads to

ive got the same pads pete but i have not had a problem with them squealing did you bed them in properly.?

yeah they have that thin compound on them that requires light to medium use initially before giving them the usual bed in process (from 100kph down to 15kph several times till hot then cool down and repeat if necessary)

I haven't done that final process yet cause they were only put in 150 km ago but I think they may be ready for the final process now.........hope that fixes it.

On another note, do they bite those rotors or what.....very unforgiving even on initial grab and wants to throw you thru the windscreen everytime, lol

yeah they have that thin compound on them that requires light to medium use initially before giving them the usual bed in process (from 100kph down to 15kph several times till hot then cool down and repeat if necessary)

I dont know if thats meant to be done with my brake pads but hell I'm going to give that a try see if that works!

anyone keen to come bowling friday night? Salisbury Bowland, 8:00, $19 for 3 hours of bowling

Friday night is my Vili's and cruise night :) do you remember that place?? its where most of use to hang out on Friday nights :)

yeah they have that thin compound on them that requires light to medium use initially before giving them the usual bed in process (from 100kph down to 15kph several times till hot then cool down and repeat if necessary)

I haven't done that final process yet cause they were only put in 150 km ago but I think they may be ready for the final process now.........hope that fixes it.

On another note, do they bite those rotors or what.....very unforgiving even on initial grab and wants to throw you thru the windscreen everytime, lol

I put a chamfered angle on the leading edge of new brake pads to stop them sqeeling.... nothing over the top use a file and take the sharp edge away. it has alwayz worked for me :)

i did the same with my pads mick, made the squeeling stop enough for me to hear my dodgy wheel bearing on the front passenger side :)

i remember reading on here a while back that one of the SAU members works for CBC, any one remember who?

i did the same with my pads mick, made the squeeling stop enough for me to hear my dodgy wheel bearing on the front passenger side :D

that could be a blessing in disguise.... not fun when they collapse totally :)

Had a mechanic fit the brake pads and rotors up and yeah he did the shims - everything looked to be done well and bedding in was done according to the instructions from the brake pads. I'm gonna take the pads out sometime in the next couple days get some anti-squealing shiz into it see how it goes then... damn thing is driving me nuts!

i have some red goo stuff that heslo luke told be to buy when he did my rotors

and pads,

never heard on squeel from my brakes, no matter how hot they got,

its still pretty much full tube, you can have it

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...