Jump to content
SAU Community

Recommended Posts

is one better than the other?

and has anyone done a 26/30 with a Getrag hanging off it?

Hey Luke, get a price for 2 bud ;)

think that the S2 motor is the same as the 31 block, im sure ryan will know the exact bits tho

think that the S2 motor is the same as the 31 block, im sure ryan will know the exact bits tho

The series 1 VL block doesn't have any oil, coolant ports on the side of the block, nor a return point. They were all blank when they were casted. The series 2 and the R31 RB30 blocks are identical in the fact they have the Plugs in all the feed points. Km's wouldn't phase me either on these blocks as they are brilliant castings. Pulled the head off a clapped out rb30 with 440,000km on it only to find it still had original hone marks on the bores. You wouldn't go to the trouble of twincaming an rb30 without a freshen up anyway.

Edited by Ryanrb25

Wow! A lot happened on the SAU-SA soap opera today. I knew I should have set my video before going to indoor soccer.

So let me get this straight:

Cruises have finished? :O

SAU gangs have formed? ;)

Police are to be notified everytime we start our cars? :)

And everybody here has sand in their...body? :P

You all make me LOL! Thankyou. Peace.

picked up the 200 yesterday. epic fun. :P

anyone knows whats happend to that Sly GTR today? apparently had a mishap on main north rd near the ford dealership. Hope its nothing major.

yeah, saw that, saw him cruising up north east when i was headin in to pick up the 200, and then parked up and looking somewhat worse for wear not too long later near the ford dealership. mad me sad. :)

shotgun his front bar. but yeah sucks to hear, hope it isnt to bad.

wasnt much left of his front bar. took a nice hit to the front right corner.

Just took the 31 down to the boys at Aussie Dyno (& Mufflers) to get a new cannon coz i snapped mine off lol. Very helpful and polite guys! And now that im on uni holidays, time for all the other pointless crap to go in that i had just lying around ;)

RIP ... Wendy Van Gasteren

http://www.news.com.au/adelaidenow/story/0...008-910,00.html

Killed 2 years ago today at O'Halloran Hill by motorcycle colliding with a pedestrian and then traffic behind not seeing her.

Was one of the best friends, neighbour, riding buddy you could ask for.

A tragic loss to the motorcycling community in Adelaide, who co-coordinated with me a few awareness programs. Not forgotten.

Ride safe, drive safe.

;)

Edited by RubyRS4
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...