Jump to content
SAU Community

Recommended Posts

Half cage is legal. I'll get the section from the ADR handbook in a sec.

From memory, it must be padded and you must re-register your car as a 2 seater, but I'll look it up now.

Edit: and get it engineered, and carry the paperwork with you. But either way, cops wont have a clue and will defect you even if you show the engineers report.

Edited by CRoNic...
can anyone recommend anygood places to get roll cages made up that are road legal, cauz i wanna get a drift car biult up, and still have it legal for the road.

cheers... michael p.s guess its gunna be an expensive sport but, seems like poeple are getting into it, oww luke(orgzmc) do you know much places to get good parts and what i need for it, im thinking of a 180 or such.

Alright here's a quote from what the act says:

Roll Cages

Due to the increased risk of occupant injury in vehicle accidents the fitting of full roll cages are not permitted.

However, the fitting of a roll cage rearward of the driver is permissible providing that:

a. No part of the roll cage is contactable by vehicle occupants when positioned in their normal seating

position.

b. The roll cage is at least 150 millimetres rearward of the front seat occupants when the front seats are

located in the most rearward adjusted position.

c. All rear seats and seat belt assemblies fitted in the rear compartment are removed.

d. The operation and effectiveness of the front seat belt assemblies is not affected in any way by the roll

cage.

e. That no person travels in the rear of the vehicle at any time.

-dstroy u plan when and when you not gonna need it :D i think i might go roll my car

on a unrelated matter the 1 benefit of police attention on cars is i can skate freely where eva the hell i want, gone are the days i used to get 30 min leatures of pointless dribble and friends getting $50 fines. was skating down jetty rd went past a cop with time on his hands and nope didnt even so much as look at me. love it ;)

here is my stealth ute shes a monster now with the black sunnies and truck pipes, wonder how long till the cops pull me over bout it. :P

keep a look out for this at glandambo 4x4 event if anyone here goes to it you might see me there this year. im gunna jump the table top and land in the mudpit, hopefully land on all fours.

on another note is it illegal to have your cam gear cover off as i want to get some purdy red cam gears.

post-49670-1230989305_thumb.jpg

Not sure if it's illegal but I wouldn't recommend running no cover, if a stone gets kicked up from the road and comes into contact with the timing belt and causes trouble, things could get interesting. Just buy a clear cam cover then you have protection and can still see all the pretty stuff

hey all, just wondering if anyone knew if you can put gtr injectors into a 33 gtst and if so what els do u need? eg resistor packs

i do believe its a no go... they only fit on rb30 an 20 from wot i'm told...

rb25det are side fed, rb25det neo is top fed and rb26, rb20 are top fed

it could be done but there needs to be some modifications to the rail, collars etc best bet is to just go with side fed sards or nismo injectors

http://www.news.com.au/adelaidenow/story/0...5018092,00.html

For everyone who hates the human colostomy bag known as Amber Petty.

-D

Cruel but funny: 9% (60 votes)

Tall poppy put-down: 7% (50 votes)

Hurtful and uncalled for: 10% (65 votes)

Total rubbish: 14% (93 votes)

Spot on: 58% (372 votes)

HAHAHAHAHAH

Edited by AndrewJZX100
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
    • Did you hit up the search function? R33 and greddy and cable returns this thread with some options.   https://www.sau.com.au/forums/topic/358214-rb25-throttle-body/
    • Thanks buddy.. the standard one needs to be about another inch or inch and a half longer. Thanks anyway
×
×
  • Create New...