Jump to content
SAU Community

Recommended Posts

20" vault chromies at the front and black steelies at the rears... massive street cred increase right there :yes:

FS: set of Steelies. Comes with 2 extra if you're going to bust out huge skids and want to keep that line going down the street.

Unknown offset... but when they're ablaze, it doesn't matter.

:cool:

:cool:

I typed in Commodore Steelies and Commodore Stockies and Commodore Skids and this is what it came up with:

skids_gull.jpg

img1.jpg

img2.jpg

Look at that first picture of the Commo ripping it up... notice how the passenger is wearing a helmet, but the driver isn't? What a fail! Maybe the passenger window is open and he's wearing the helmet to protect his head when the tyres burst and rubber fly's through the window :yes:

FS: set of Steelies. Comes with 2 extra if you're going to bust out huge skids and want to keep that line going down the street.

Unknown offset... but when they're ablaze, it doesn't matter.

:cool:

On another forum I saw some modified steelies with monster dish on a Rolla,... looked phat

that could be another option for the 32 .... would be different

SOLD MY NINJA 250R on my way to buy a 2006 yamaha R1 50th anniversary edition woohoooooooooo

Is that the yellow one in traditional yamaha colours? if so they look very nice! but i don't like the way R1's ride.

If anyone wants a set of steelies i have a set of 16x7.5 ~+35 5x114.3 that i'll let go for $30 each or or $100 for the whole set (and i'll throw in the plastic hub caps). They'd be perfect for drifting as they would be easy to straighten and who really cares for $30, or for some rep' points on the street.

Edited by D_Stirls

im being told fully bored out rb25 rehousing with hi flowed internal will make close to 300rwkw..

anyone else think this could happen? i didnt think the 25 turbo is big enough even after being bored out

im being told fully bored out rb25 rehousing with hi flowed internal will make close to 300rwkw..

anyone else think this could happen? i didnt think the 25 turbo is big enough even after being bored out

Yeah it probably could but would cost you a packed to do it properly

I have 2 x standard GTR turbos that are steel wheels and my car make 300kws on 16psi of boost

im being told fully bored out rb25 rehousing with hi flowed internal will make close to 300rwkw..

anyone else think this could happen? i didnt think the 25 turbo is big enough even after being bored out

Adrian, who told you that?

I had a what you call a 'bored out' rb25 rear with larger steel wheel with my gt2871r and it was on the limit at 250, hence why i bought the new turbo.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...