Jump to content
SAU Community

Recommended Posts

There's alot of talk of cranking over an engine without actually starting it to build up oil pressure.... noob question, but how do you do this?!

Unplug your crank angle sensor mate and crank it with the key, it will crank over but not fire, hopefully building some oil pressure....it probably wont build enough to read anything on the guage however...alot of people do this when a motor has been rebuilt and they need some sort of oil flowing through so they know the oil pump is primed.

Ok just got back from Dyno. Boost controller having trouble holding boost as it spikes to 25psi and by the end its at 19.5psi.

1st Run wheel spun its titties off so Pete had to tighten the straps more (made 279)

2nd run right up the top off the torque range it lost traction again and the graph fell away (made 323.8)

3rd run the heat had set in but still managed 323.2 and still wheel spun a touch up the top of the torque.

If i can get the boost to hold more stable who knows possible. I will post the dyno graph in the RB25 upgrade thread sometime today.

I owe all this to AD (aka180or200)who has done an absolutely brilliant job on tuning my car. Your a legend mate.

Needless to say i'm stoked with the outcome.

Loving the new found torque also

luke when ur 25 its even cheaper :)

i hate this dam weather so hot

and im still waiting for my bitch to get back so i can put her new shoes on my 360rwkw 4door build up track/drift mainly no more street car for me

P.S got back from wallaroo and caught some small snapper etc was nice there if i had my car back i would have taken it to 1/8 lots of squid snook gar tommy ruff and sharks etc.

got 50 pound braid on my snapper rod and the dam big arse snappers snapped my 50pound braid lol.

what would this fetch if i were to sell it the way it is ,

not exactly sure whats wrong with the engine but it still runs

stats

ENGINE:

RB26DETT conversion

RB26 sump w/transfer case sliced off

RB25 engine mounts

RB25 Harmonic balancer

HKS Intercooler with custom front mount position and solid piping

BLITZ 80mm S/S tuned front pipes

SIGNAL S/S (1.1mm and 7kg!) rear 80mm straight through carbon muffler

HKS Pod filters

Splitfire coil packs

TODA Racing clutch

TODA Racing 4.5kg Flywheel

CUSCO 2 way mech diff

IRIDIUM Plugs - 6's

R33 GTR fuel pump

SUSPENSION / BRAKING AND HANDLING:

SELBY rear 28mm sway bar

RACING GEAR coilovers

D1 rear camber arms

D1 HICAS lock

CUSCO front tension rod

Solid rear subframe bushes

D1 adj castor rods

PROJECT MU Slotted front rotors

TRW (LUCAS) brake pads all round

NISMO Front strut brace with brake stopper

GTR rear strut brace

BODYWORK & INTERIOR

Full body respray in Blood Orange

Satin Black bonnet and wing

SPARCO bonnet pins

NARDI Steering wheel

TRUST gear knob

SPARCO Spirnt drivers seat w/ BRIDE Rail

GReddy Profec B Spec II boost control

GReddy Turbo Timer

New Carpet

GReddy Boost Gauge

btw its my car AS IS , make me an offer , might be inclined to sell it .

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...