Jump to content
SAU Community

Recommended Posts

I do

morphett vale, pm me

Cheers for the offer, i'm at campbelltown so by the time i drive down there to pick them up and then drop them off i might as well as bought a set as their only around $40. Thanks again though

Anyone in the north have any spring compressors?

Cheers for the offer, i'm at campbelltown so by the time i drive down there to pick them up and then drop them off i might as well as bought a set as their only around $40. Thanks again though

Anyone in the north have any spring compressors?

like these ?

draper-250mm-pair-of-coil-spring-compressors.jpg

ive got a pair but they are at a mates , ill get em back this week and you can borrow them if you'd like ?

Arse, shenanigans went on last night and I missed it :(

anyone going to the ben simpson cruise? i might drop by with a few work mates for an easy drive!

I'm going ;)

Hoping there'll be some other cars as slow as mine so I don't get lost :D

If last night was anything to go by it should be great weather for a drive tonight.

I'm going :D

If last night was anything to go by it should be great weather for a drive tonight.

Yeah me too...Went for a quick cruise last night, Henley etc was pumping.

cops were left right and centre at the cruise so i left! there was a white falcon parked next to me with SAU stickers, who would that be?

Yeah that is Luke (and Flick)'s car Son - that's where I disappeared to - had to go steal some fries off them at Hungry Jacks and have a chat.

Spewing I had to go out to dinner rather than cruise - but at least I came down to say Hi to some peeps at the meet-point :sick:

anyone else here got an rc drift car? got any good locations that you frequent with it? ive heard of an old rc drift track in regency area, anyone heard of it?

yeah , i used to race there with my cars

ill find a map of it after i finish dinner and post it up

Went out for a nice cruise last night about 1 till 5.30 ish this morning no cops around. Went down south it was a great night for it finally got to open the car that i just got up. Great night didn't see many cars out at all.

Yeah that is Luke (and Flick)'s car Son - that's where I disappeared to - had to go steal some fries off them at Hungry Jacks and have a chat.

Spewing I had to go out to dinner rather than cruise - but at least I came down to say Hi to some peeps at the meet-point :sick:

yeah you left at the right time! after you left cops were pulling alot of cars over outside the carpark and apparently traffic cops were comming or something. i thought since i wasn't gonna cruise i'll leg it as well

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...