Jump to content
SAU Community

Recommended Posts

theyre stupid is what they are.

and i cant even put into words how properly ridiculous this thing would be;

IMG_0008.jpg

Years ago a Peripheral ported 26B, 4 x rotor job won Le Mans. If I remember correctly rotas were banned soon after

Rotarys are effectivley a 2 stroke engine (even thought they don't actually have a stroke) that is why they use more fuel but that is also why they produce so much power with such small displacement.

How about these apples;

Edited by D_Stirls
oh, ive bought a set of pads for the s14 as i can hear the current ones squealing, nothing special, just something to keep my brakes going til i get my qfm's and rda's, but uh... ive never changed pads on 4 pot brakes before, so would anyone be willing be help out?

they are the easiest setup to change i have encountered. the rears require a bit of fiddling to "screw" the piston back in, but they are still 10 times easier than my ford rears that also screw in and you need a special tool to do it (which i didn't have).

Rotarys are effectivley a 2 stroke engine (even thought they don't actually have a stroke) that is why they use more fuel but that is also why they produce so much power with such small displacement.

3 sided rotor is kinda like having a 3 cylinder 2 stroke with rotor apex seal opening/closing ports as seal passes/exposes the port

Yeah sucked big time. I still think the best days were when we had BMW's, Volvos, Ford Sierras, GTR's in the ATCC

Holden v Ford is a little boring imo

Word to mutha..... its a boganfest atm.... the group A's were much more interesting to watch.... too many rules in motorsport these days. I just wish it didn't come down to R&D budgets.... I reckon some of the early grand prix's in the 30's would be more interesting to watch than todays F1..

-D

Word to mutha..... its a boganfest atm.... the group A's were much more interesting to watch.... too many rules in motorsport these days. I just wish it didn't come down to R&D budgets.... I reckon some of the early grand prix's in the 30's would be more interesting to watch than todays F1..

-D

F1 which I've been following for nearly 25 years now has been pretty good still up until the last 4 or 5 seasons. Cutting capacity back to 2.4L V8 from 3L V10 and then the engine development freeze and then controlled ECU and now they've f**ked 'em up with new aerodynamics. Should be an interesting first few GP's this year....

3 sided rotor is kinda like having a 3 cylinder 2 stroke with rotor apex seal opening/closing ports as seal passes/exposes the port

Yep there is 3 power "strokes" per 1 revolution of the rotor but there is 3 revolutions of the eccentric shaft per 1 turn turn of the rotor. Since the output shaft is the eccentric shaft, there is 1 power "stroke" per revolution of the output shaft which is the same as a 2 stroke engine.

Edited by D_Stirls

C17

Snap, seen that before the Defence Air Show in 07 :D

Im officially "touring spec" at the moment

Sub box is being modified / re-designed this weekend, cos i got a bargain

CameraDownload1364.jpg

Custom Sliding Drawer System for GQ Patrol (not properly in yet, still gotta bolt it all down and put a couple of dress panels in

CameraDownload1365.jpg

Buttload of snatch straps - 2x 4t, 2x 2t, 2x1.2t straps, a snatch block and tree trunk protector, plus a heap of D shackles. Got a couple of different height tow hitches too, and a polyaire exhaust jack

CameraDownload1368.jpg

ARB Touring roof rack (put in spot with a crane cos it was easier than trying to lift it lol)..........so now i got somewhere to put extra bits and pieces w00t

Edited by Matty 31
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
×
×
  • Create New...