Jump to content
SAU Community

Recommended Posts

It's less risky when you use a broker who knows what they are doing and have the right contacts in Japan. Keep in mind though that things can still happen that are out of their control as well.

I'd buy another car through Kristian (Iron Chef Imports) without hesitation, although I'm trying to cut down on the whole buying of cars thing :3some: (18 in 6 years is a bit excessive).

its deff something you wanna spend some time reasearching unlike my stupid bro that tried importing a car to have it sit on the docks. we tried getting it in as as a race car only and they still shut it down based on -does not meet aus safty standards

hey Penny, a guy i work with (he is on here but dont think he posts much) is looking to get a turbo conversion done to his 34 GT. he has a workshop lined up, and all the info. i can get him to get in touch wit u if ur keen?

hey Penny, a guy i work with (he is on here but dont think he posts much) is looking to get a turbo conversion done to his 34 GT. he has a workshop lined up, and all the info. i can get him to get in touch wit u if ur keen?

Yeah that would be great thanks!

Will be good to compare my options, cheers :3some:

KKR are ass. Cheap, laggy, etc.

You be the judge:

http://www.skylinesaustralia.com/forums/Kk...od-t183792.html

http://www.skylinesaustralia.com/forums/Kk...33-t260106.html

http://www.skylinesaustralia.com/forums/Tu...wn-t253002.html

http://www.skylinesaustralia.com/forums/Ch...it-t251203.html

http://www.skylinesaustralia.com/forums/Fm...os-t251603.html

http://www.skylinesaustralia.com/forums/Kk...80-t249134.html

http://www.skylinesaustralia.com/forums/Kk...ns-t245965.html

http://www.skylinesaustralia.com/forums/Kk...rs-t229806.html

http://www.skylinesaustralia.com/forums/Kk...ea-t216361.html

http://www.skylinesaustralia.com/forums/Eb...es-t236327.html

http://www.skylinesaustralia.com/forums/Kk...os-t237320.html

"I just bought a KKR turbo, installed it and now I hear a whining sound when it comes on boost..."

"I have a KKR turbo and when I hit boost, there's a cloud of white smoke behind me?"

"I just bought a KKR turbo. Then my wife left me. Then I heard a metal clanging sound when it hit boost?"

And the topics just roll on...

i donno, there's alot of good and bad in all those posts.

to be quite honest, when i drive the silvia, she gets one HELL of a beating. and that turbo has gone through hell but its kicking pretty strong still.

i guess i cant give a full comment about the kkr as mine's a cross bred with garret and the wategate has been sorted out already but im pretty happy with my 1.8ltr turbo that can stomp a 6ltr v8 :3some:

too much in this thread to pick apart everything specially on 64k and now I've had too choose the PDA skin to try and optimise load times

someone made mention of sensible's im guessing you mean the one on OG rd, that's where i bought my car and had no drama's had snapped turbo manifold studs got them replaced had worn rear brakes got them replaced bought the car without driving it only hearing the engine NOT because they wouldn't let me drive it but i didnt want to fall in love with the car and have finance fall through

Ben - this should hit that itchy spot

SpaghettiSpoon467Three.jpg:3some:

hrrmmm cars been in the workshop for a month or so now and i'm feeling withdrawl symptoms :woot:

I hear ya. the gtr has spent almost a week of the last month at the mechanics getting loads of stuff done... *sigh*

The angst of owning an import haha

-D

what's happening to yours?

so far i've had major service (timing belt, tensioner kit) n1 water pump, isc radiator, new hosing and nissan coolant installed, i got brakes and pads on order and after that i'll be putting in N1 turbos and a new gearbox... its currently there getting a cracked heater core hose repaired... fun stuff

-D

nice

Im off soon to pick up my ordered sparkies, and to grab a 30%-angled thermalflex ply silicone joiner hose + a cple tbolt clamps

finishing off the piping properly, then might get a mandrel bent 2-piece copy made of the intercooler piping system Ive tee'd up

also put mesh around the front of the bar, looks amazing TBH :woot:

(cut bottom of day bar, big fmic tucked behind black mesh)

then dropping off the missus for her last wrist surgey (carpel tunnel, right wrist a success after 7 weeks, so here goes

hope Pokie has a good birth today

our friend had little Jye last week, nice boy to join 2 sisters

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...