Jump to content
SAU Community

Recommended Posts

nero is the problem, even tried burning through windows, still = fail

hahah >insert witty quote about redheads and burners<

sorry but how is nero the problem?

If the burn fails during the procedure, your burner might be faulty.

If you can't even get the file into a filesystem template and prepare the image, then give up and hire a nerd for half an hour. Then sell your PC and buy an abacus.

-D

Dammjust got back from my regency appointment and failed :D.

Got done for tiwsted brake line but it passed the brake test.

6 x 9 speakers in the back so they cut the metal parcel shelf and parkers and low beam on 1 side.

Does any1 know hwo or where i could get to fix/ put in a new metal parcel shelf???

please help

Parked our car in Jetty Road, Largs North on Saturday afternoon.

We had two (2) Port Power season tickets sitting on the dashboard.

Some bastard broke into the car and LEFT TWO MORE!

A rebuilt high flow i would of thought would be better than a 2871

52T 2871 will do 250rwkw and a 56T will do 270rwkw, i don't see a high flow doing that. Garret rate them at 460 and 475 hp at the engine respectively.

Edited by D_Stirls
Parked our car in Jetty Road, Largs North on Saturday afternoon.

We had two (2) Port Power season tickets sitting on the dashboard.

Some bastard broke into the car and LEFT TWO MORE!

Wow.... I guess they couldn't have been true port supporters

after all, you didn't mention that they'd stolen your car radio :D

-D

Dammjust got back from my regency appointment and failed :D.

Got done for tiwsted brake line but it passed the brake test.

6 x 9 speakers in the back so they cut the metal parcel shelf and parkers and low beam on 1 side.

Does any1 know hwo or where i could get to fix/ put in a new metal parcel shelf???

please help

cut metal parcel shelf........you'll be lucky not to get black listed for that (as the parcel shelf is usually part of the structural steel

might be worth checking out what nisswreck can do for you though

heres the question scott, how did you not know your headlight was out? i can pick it on any car i drive (especially at night).........and i woulda checked all my lights before going anywhere near regency anyway

Dammjust got back from my regency appointment and failed :D .

Got done for tiwsted brake line but it passed the brake test.

6 x 9 speakers in the back so they cut the metal parcel shelf and parkers and low beam on 1 side.

Does any1 know hwo or where i could get to fix/ put in a new metal parcel shelf???

please help

are you kidding me for 6x9's ???? that means you could defect a lot of cars in this town. I dont care for 6x9's but that is petty shite , its going to be expensive to fix labour wise unless you can weld, rear window might have to come out just to keep from breaking it ,, that sux big time

try a body shop for install if you dont want to attempt it

anyone have about 20-30cm or so of 3M automotive double sided tape laying around? The tough stuff they use to stick on car trims, etc. NEED some.

superchump doesnt sell the good stuff, not the one down south anyway

you need the red 3M tape , used for trim, call up any auto paint store for it, or rare spares on south rd

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...