Jump to content
SAU Community

Recommended Posts

thinking about changing to one of these

wait till you throw a balance shaft on the 4g63, mine did off idle , a very common problem, destroyed the block in seconds. and the all wheel drive fuel economy sucks.

mitsu dependability :cool:

turbo failure a few months later, and a few clutches, gearboxes, and transfer cases later.. good thing it was only a daily not a racer, or it would have never made it to the race track...daily driver, hell it was broken down more then it worked..lol

and that was on a basically stock tune evo/vr4 drive train, not a highly tuned monster.

plus R34 prices have fallen into the toilet for resale ?

go for the Lada..lol they come with duct tape and bailing wire to make them last forever..lol

I drove Munro's Evo 8 when it was brand spanking new and it really didn't inspire me .... and looked like a chick's car .... yawn

At the end of the day it is STILL a lancer

so i went to lonsdale to get my r32 inspected (vic -> sa) and of all the things i could possibly get picked up for...window tinting...

'too dark on the rear quarters and the whole rear window'.....silly stuff, guess im back to peeling...

wait till you throw a balance shaft on the 4g63, mine did off idle , a very common problem, destroyed the block in seconds. and the all wheel drive fuel economy sucks.

mitsu dependability :(

turbo failure a few months later, and a few clutches, gearboxes, and transfer cases later.. good thing it was only a daily not a racer, or it would have never made it to the race track...daily driver, hell it was broken down more then it worked..lol

and that was on a basically stock tune evo/vr4 drive train, not a highly tuned monster.

plus R34 prices have fallen into the toilet for resale ?

go for the Lada..lol they come with duct tape and bailing wire to make them last forever..lol

I knew someone would piss on my parade :(

parade pissing is awesome.

a 19mm nut on my front left strut pissed on mine, last person to work on the suspension partially rounded it. cant fit a 19mm anything onto it. pu.

so i went to lonsdale to get my r32 inspected (vic -> sa) and of all the things i could possibly get picked up for...window tinting...

'too dark on the rear quarters and the whole rear window'.....silly stuff, guess im back to peeling...

Did they let you drive it away from there? When I changed over rego at Regency on my old MX6 in 2002 they gave me a razor blade and told me to get the tint off on the spot, else get a tow.

parade pissing is awesome.

a 19mm nut on my front left strut pissed on mine, last person to work on the suspension partially rounded it. cant fit a 19mm anything onto it. pu.

Sounds like a light angle grind on each side then a shifter spanner or locking pliers Dave. Works a treat!

Sounds like a light angle grind on each side then a shifter spanner or locking pliers Dave. Works a treat!

+1 have done this a few times,

also a thin file on a rounded phillips head makes for a good ghetto once off flat head fitting

anyone know when/how carsales.com updates? or anyother sites i should check out

im pretty sure tradingpost.com is every thursday but i dont know about the other sites.

i like to keep my eyes peeled for any 240z dato's for sale amunst a few other oldschools. 14k is the best ive seen for a clean 240 so far.

cops wont hate on it and i might even be able to park at shopping malls with it.

Edited by Inline 6
parade pissing is awesome.

a 19mm nut on my front left strut pissed on mine, last person to work on the suspension partially rounded it. cant fit a 19mm anything onto it. pu.

lol sounds like my issues dave, sinergy put my tires on and obviously used the wrong size socket on my expensive blue alloy lug nuts. had two rounded out in a big way, they went thru the trouble of filing them off after they got them off to remove the burr they left . only issue was it shows bad on blue nuts when the rest of it is shiny alloy.... trained monkeys , a socket must fit tight on the lugs or the rattle gun kills them when you hit the trigger, its not rocket science ????

Oh damo,, its always better to piss(hear about issues) before you shit(buy a piece of shit)

you could always buy a forden executurd...lol

build a RB30DET GTR driveline, VE holden.. ex cop car...lol talk about stealth

anyone know when/how carsales.com updates? or anyother sites i should check out

im pretty sure tradingpost.com is every thursday but i dont know about the other sites.

i like to keep my eyes peeled for any 240z dato's for sale amunst a few other oldschools. 14k is the best ive seen for a clean 240 so far.

cops wont hate on it and i might even be able to park at shopping malls with it.

AFAIK those sites are live, so once u submit an ad it is up for the length of time that u pay for (much like ebay)

build a RB30DET GTR driveline, VE holden.. ex cop car...lol talk about stealth

Or enclose the bottom of the VE, put a few fins on, and turn it into the boat that it is. RWKW? I think not. How many killerwasps do you have at the prop man?

For all you Galaxy, Star-loving people out there...

Earth is tiny compared to these other planets:

http://digg.com/d1ofQT

i didnt know jj.am had educational stuff? i thought it was all just naked chicks and racist gifs.

you know what that all means though? we all gotta start compensating for size of our planet.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...