Jump to content
SAU Community

Recommended Posts

^^ does he even drive it apart from onto a dyno :/

hahaha yeah

they just did it with all stock stuff and he couldnt brake so they upgraded to the slotted rotors and better pads and that made him stop lol mind u this was all on the street too!

Edited by MissR34
the thing is luke, i wont be tracking or dragging her, she will be dyno queen and streeter.

so ill be going with Brembos and maybe EBC Red Stuff brake pads......

Brembos are great, but make sure u get a large rotor to match those sweet calipers

and avoid the EBC Red's... theyre track pads

if you're streeting, stick to EBC greens/bendix ultimates or the QFM pads

-D

and avoid the EBC Red's... theyre track pads

if you're streeting, stick to EBC greens/bendix ultimates or the QFM pads

ive been told to stay away from EBC greens cause they are too noisy and create alot more brake dust than the reds?

I used Red Stuff on my R and they were brilliant.

Very clean on the wheels too (ceramic pads), unlike Bendix, and can handle both street (low coefficiency) and the ocassional track day without fade (high temp handling).

Were a bit noisy for the 1st 1000km but quietened down eventually and grabbed those rotors hard and fast!

I used Red Stuff on my R and they were brilliant.

Very clean on the wheels too (ceramic pads), unlike Bendix, and can handle both street (low coefficiency) and the ocassional track day without fade (high temp handling).

Were a bit noisy for the 1st 1000km but quietened down eventually and grabbed those rotors hard and fast!

sick, thanks for that Pete, i rekon ill get the ebc reds for sure :/

rb stickers, dosnt anyone like sleepers these days :/

i prefer the dont need to brag about being able to whip your ass at the lights approach.

but then it might get 1 or 2 bogans to accept they cant beat you and not rev you at the lights

Edited by Inline 6

yeah you make a valid point, but then ppl still dont believe its a gtr anyway. love it when they ask me, if im lying with the badge why would i not lie when you ask me

i did rock no badge for a lil while :/

Edited by Inline 6
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...