Jump to content
SAU Community

Recommended Posts

huh.....I thought it was for her 34?!

Your bro must have other issues Carl (condensation in the fluid can have a similar effect sometimes).....Red Stuff has a very low coefficiency which makes them quite effective when cold, mine would throw you thru the windscreen 1st thing in the morning on the way to the shops.

EBC Pads

EBCPadHeatRange.jpg

interesting to see that the effective temp vs braking force at the low end is pretty consitant through the lower end of the range.

looking at that chart, something must have gone wrong with the brake set up, as he used to have yellow stuff on the car, and it was much more streetable than it was with the red.

the brake booster has since been replaced on the pug, i have not had a chance to drive it since then, as its now a hill climb car that lives in a shed.

yeah that does seem somewhat strange Carl.....especially with his experiences with the Yellow Stuff.

Guys like Chad (Dstroy), Andrew (Blue32) and eventually Luke (ENR34), who regularly track their cars, could do alot worse by not at least trying the Yellow Stuff.

For track only, the Blue Stuff freaks me out a bit cause I'm guessing that not only would they squeal like a pig on heat but they would be very hungry on the rotors.......hence why the Yellow Stuff would be a good option......cheaper and quicker to replace pads than rotors.

can i give your car some finishing touches with a shotgun cara?

guaranteed 1st prize !

yeah no dramas carl.....just make sure the design looks half decent ok!

6 or 8 pot?

depends what i can find at the time......maybe just have to go with r33 gtr 4 pot....but considering the car isnt going to be drivin stupidly hard they should be all good for what im gonna be usign her for

huh.....I thought it was for her 34?!

Your bro must have other issues Carl (condensation in the fluid can have a similar effect sometimes).....Red Stuff has a very low coefficiency which makes them quite effective when cold, mine would throw you thru the windscreen 1st thing in the morning on the way to the shops.

they are for the 34 :)

i quite liked the sig!

2qvuijc.gif

tis a bit large tho. in consideration, sig scrapped...

BOLOGNESE :)

i see its back again :)

its been reported

a signature by definition isn't a movie its a picture that the community can quickly see who has posted, 1403.43 KB (1437109 bytes) is inappropriate

you may see this as harsh.... to bad

i see its back again :P

its been reported

a signature by definition isn't a movie its a picture that the community can quickly see who has posted, 1403.43 KB (1437109 bytes) is inappropriate

you may see this as harsh.... to bad

Maybe you better report your mate Heslo, as his is a movie also.

Maybe you better report your mate Heslo, as his is a movie also.

his isnt 1.4mb

from memory its 600kb edit not even 478.36 KB (489841 bytes) thats why i have never complained about it

yeah Carl cables extreme unlike Sydney we only get 256k upload

lol, there are perhaps some things i can do....

not sure if u are aware, but there is a flaw in the monthly quota being reset, and u actually get unshaped the day before your account anniversary date... so there is the potential to wax about 18Gig on the last day at full speed if u have good torrents or use news groups.

im pretty sure that only works if u are shaped b4hand tho

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...