Jump to content
SAU Community

Recommended Posts

whilst playing with coilpacks etc, i noticed that r34's have 2 butterflies? 1 in the throttle body, obviously, but one that remains open, that sits (looking top down) just right of the TB. what controls that?

anyone know who sells a cheapish front/dump pipe combo ?

need one today for under $200 locally !!!

hey Mitch, ring around, wreckers dude. bound to find something

if you really get stuck, i have a stock dump you can take off my hands for next to nothing, and you'll just need to source a front pipe to match.

i wish :P cant afford an evo, i would <3 a evo5 stripped/caged

got around 15k for a weekend/track car (obviously change from that is prefferable but you get what you pay for) motorkahna/hillclimb/grip are my main goals, the odd skid day wouldnt be frowned upon

R33 is pretty decent bang for buck, you can pick up one with some fairly decent mods for around the 15k mark. you can shove wide tyres on the rear for traction, throw in some adjustable arms, front sway bar, front and rear strut braces, half cage if you want to.

id stab myself in the neck before buying a 33, as cheap as they are now..... still would stab neck.

been lookin at:

32

s13

s14

180

id prefer one already set up for track use (built cars before, cbf doing it right now) so if possible cage/rims/tyres/few mods. ive been lurkin carsales/ns.com & here, found a few possibilities.

edit** if i cant find a worthy candidate from the import world ive got a mate who will sell me a modded sr20det with x-member and gearbox mounts to suit a mk2 escort..... a very tempting option

Edited by rhys5169

Note to self:

Sell black Stagea

Buy black Porsche

Drive Porsche thru city looking for imports to challenge (Stagea in this case)

Proceed to speed past at 80kph passing cops in the city in a 50kph zone

Watch in rear mirror as cops ignore Porsche and suss out speed limit obeying Stagea

:P

FAIL

Edited by RubyRS4
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • UPDATE: Yes the GSP Axles are compatible. I installed it on my R34 today and they are working a treat! Turns out that the S13, S14, S15, and 200 SX all used the same axles as the HR34, and ER34 NA models. Which is 2 bolt x 3 pairs.  
    • Also build this EH ute with 370z motor and gearbox with a couple of turbos just for fun.  
    • Got the passenger door on plus the master cylinder and booster. Loaded up to take it home. At home, the colour changes a lot in the light.
    • Nothing cheap, but I have seen the AC Hydraulic DK13HLQ which is pretty close to what you're asking for. The problem is the hydraulic cylinder mandates that the back of the jack be a certain height and Skylines have fairly deep inset floor jack points. A more certain and cheap option is to get some nominal 2x10 inch lumber boards and have one board be 1.5 feet, the other board 3 feet. Glue it all together with lots of clamps to maintain pressure. Make two of these. The ramp suggested above is a good idea, it takes quite a bit of clutch slip to get over each of the boards. I only need the first ~1.5 inches for my low profile jack on a standard ride height car but a lowered car you want to go up to the full ~3-3.5 inches. Paint it or store indoors if you want it to last.
    • Ok. And Nistune? I read (here too) mainly on Stagea threads that it can by "turn off" with Nistune. But they say they still had the sensor plug in. Next week iam going to the Nistune(and other ECUs) tuner so i can finally make it work. I drove the car home and apart from the cut it drove great. No misfire no smoke no hesitation or rough start...so hoping it is this sensor that is missing  
×
×
  • Create New...