The Sa Wasteland

[Weezy]

no thxbai lol

[MissR34]

i is bored.

[Aberax]

I want HIDs..

Anyone got any they wna palm off?

We both buy some and you can do it for me.

You both buy the kits and i'll install them for ya. Easy as to install, did mine on the R33, took me a 2-3 hours to do, but i had no idea what i was doing....now i do .

Would anyone recommend having the lights realigned since changing to HID's?

[Weezy]

Which kit should I go for Abe?

Links? Prices?

Edited June 28, 2009 by Weezy

[Luke_ENR34]

Anyone got a picture or diagram of where the bushes go on a 1974 Toyota Hi-lux? sway bar ones are easy, just like the Idler bush and some others.

Cheers

[Matty 31]

hey Matty, amazing how a bit of rubber can bring the tuff look out in a truck........4X4 + highway terrains = ghey!!

definitely.....however all terrains works for towing and daily driving. at least the ATZ 4 rib are a tough looking tyre that performs well without being noisy

i is bored.

+1

Random note, narva is awesome. They make these factory looking dash switches that fit in most standard dash openings. Had to fix up a few things for my spotties (plus preparing for the extra lights im getting in a few weeks), and i bought a few of these (excuse the holes in the dash, have to make a trip to nissan and buy a few blank plates):

and illuminated when high beam is on (right hand is the only one that has anything connected at the moment)

[D_Stirls]

i use one of those switches for my thermo fans, they fit in the 180sx slots as well.

[Aberax]

Which kit should I go for Abe?

Links? Prices?

Really comes down to how much you want to spend and brand you prefer. I myself went with a Bosch 6000k HID kit from the group buy, pictures here from my car blog - near the bottom of the page. I only went with Bosch as most of there other products are quite good, i went with 6000k as they aren't yellow and aren't too blue (illegal).

Group Buy link with pics. - I believe it has closed, but he may start another one in the next few weeks/months.

[J - Rad]

Really comes down to how much you want to spend and brand you prefer. I myself went with a Bosch 6000k HID kit from the group buy, pictures here from my car blog - near the bottom of the page. I only went with Bosch as most of there other products are quite good, i went with 6000k as they aren't yellow and aren't too blue (illegal).

Group Buy link with pics. - I believe it has closed, but he may start another one in the next few weeks/months.

Would mine hitting you up soon about that install.. One of my headlights is out at the moment so I kinda want it fixed asap. But I would really love to get HID's.

Anyone know how to get the main headlight globe out of a R32 GTS-t? I can't work it out.

[bezender]

after u pull off the rubber housing there is a clip. same as pretty much every headlight on any car i think

[Aberax]

Dust cover should twist off, unplug the wires inside, then undo the hook/latch holding the globe in.

[nugzy31]

hey peeps...have a major problem....got a hole in my fuel tank...on the stag cruise....changed it over...put the same pump back in...everything exactly the same except its a different tank...i mean its from a 31 sedan...it just hasnt got a hole in it....started up fine....drove to the ATM and servo fine.....went to put my foot down from the lights and started missfiring through the AFM...wouldnt rev..even though it would spool....it would only move if i lightly used the throttle.....any ideas people??? all cooler hoses are in their places...all plug leads are where they need to be....the tank was cleaned out...and so was the filter mesh on the bottom of the 040....im all out of ideas and very close to putting a match to this f**king thing

[RubyRS4]

hey peeps...have a major problem....got a hole in my fuel tank...on the stag cruise....changed it over...put the same pump back in...everything exactly the same except its a different tank...i mean its from a 31 sedan...it just hasnt got a hole in it....started up fine....drove to the ATM and servo fine.....went to put my foot down from the lights and started missfiring through the AFM...wouldnt rev..even though it would spool....it would only move if i lightly used the throttle.....any ideas people??? all cooler hoses are in their places...all plug leads are where they need to be....the tank was cleaned out...and so was the filter mesh on the bottom of the 040....im all out of ideas and very close to putting a match to this f**king thing

Might be a dumb Q, but is the tank from a non-EFI 31/pintara? I know with most of my previous projects, for ease of engineering and getting Regency approval for SR and CA transplants into a 1600/200B, an anti-surge bowl was grafted into the stock fuel tank. Beats having a swirl pot for the cops to see.

If its a stock non-EFI tank, then the fuel pump may not be adequately picking up the fuel. Its a guess, but my 2c worth.

Maybe also a ventilation issue with pressure in the tank?

Edited June 28, 2009 by RubyRS4

[nugzy31]

its a S3 gts (GTS2 to be exact)....R31 sedan..6 cyl.....baffles looked a little bit defferent but not completely....i just dont get it

[rad100]

cars fast and the furious

http://videos.streetfire.net/video/Pixars-..._684852.htm?ref

[bezender]

hey peeps...have a major problem....got a hole in my fuel tank...on the stag cruise....changed it over...put the same pump back in...everything exactly the same except its a different tank...i mean its from a 31 sedan...it just hasnt got a hole in it....started up fine....drove to the ATM and servo fine.....went to put my foot down from the lights and started missfiring through the AFM...wouldnt rev..even though it would spool....it would only move if i lightly used the throttle.....any ideas people??? all cooler hoses are in their places...all plug leads are where they need to be....the tank was cleaned out...and so was the filter mesh on the bottom of the 040....im all out of ideas and very close to putting a match to this f**king thing

as for the hole in the fuel tank, the best way to fix it aside from getting some brave kent to weld it is to use natural flagrance free soap. Scrub it on the hole while there is fuel in there, the soap reacts with the fuel and stops up the hole better than that putty crap u can get from the servo.

i thought it was dubious, but i tried it on the rollas fuel tank and it works a treat. The guy that i got the idea from has been driving around in his ae86 with his tank fixed like that for the last 2 1/2 years

[typevu]

DONUTS! I LOVEEEEEEE DONUTS!

[Dohmar]

DONUTS! I LOVEEEEEEE DONUTS!

Dammit jim dont say that

I could murder a jam berlinner

-D

[bezender]

[ovrtym33]

DONUTS! I LOVEEEEEEE DONUTS!

i make donuts at work everydayyyyyyyyyy