Jump to content
SAU Community

Recommended Posts

Mark, I nabbed it for $450, absolute bargain!

Kye, it's the JJR one, here's the link

Meant to reply to your SMS today, sorry, been busy. Unfortunately I can't make it, the missus committed us to her friends 22nd that night, dress up so I don't really want to go :P I've got to organise a time to get the y-pipe of you if you don't mind, very keen on getting that sorted

Luke, thats hot. :P

My old man picked up a 1994 Mitsubishi Delica Spacegear today and I got to drive it home, 2.8L turbo diesel 4WD... it came with a Nardi Torino steering wheel! I'd nab the steering wheel if I had a car to put it into lol the R33 requires airbag and the daily honda has the cruise control switches which I dont want to lose.

I was going to do the high boost mod on my car today but unfortunately got stuck at my mothers house all afternoon!!!! :P

skip it and put a bc in mate. i did it over the weekend, set mine to approx 12psi tonight. effing fantastic i tell ya!

turbos almost off again. rotated it from the exhaust wheel by hand while it was still on the engine, made a nice little grinding noise. sigh.

anyone know anyone who has a t28bb lying around?

:)

and what are you trying to say huh? huh? huh? :P

never u mind hehe

heslo: envious of the airbox.......always loved the ARC stuff....except the price

luke_enr34: have you got any cables coming thru any grommets in the firewall...............could be water coming from road spray (in the engine bay) working its way thru. mate of mine had same issue, he thought his windscreen was shagged in his patrol (plus the next 2 they installed). turned out it was his cabling for the spotties that was tracking the water in via the grommet

The things i know :P

Got my dash out today. Now to remove all the air-con components and just have the rear demister and a fan for the front window. Gonna be a shit load of space behind the dash now. Thinking of making a cf panel with 2 switches on it.

skip it and put a bc in mate. i did it over the weekend, set mine to approx 12psi tonight. effing fantastic i tell ya!

I have stock ecu, turbo ect ect ect. Little worried about detonation going for more than 7 psi. Did you bypass the factory solenoid altogether?

Yep, bypass it. You can still wind in decent boost with the stock ECU so long as your EBC is set up correctly... probably better off going that route to be honest. Then when you want/can afford go for a full fledged aftermarket ECU and get a tune, then you'll really see some gains!

turbos off. comp cover had half blown off. pulled the cover off completely, theres a couple marks on it, and theres some scraping on the blades, so ill be looking into some options tomorrow.

I have stock ecu, turbo ect ect ect. Little worried about detonation going for more than 7 psi. Did you bypass the factory solenoid altogether?

certainly did Steve

yeah the stock ecu is definitely a setback with boost - rich & retard really sucks. power wasn't being distributed nicely through the rev range - anywhere from 3500 - 6000 rpm was very flat, but as soon as you passed 6000, this big hit of power would chuck you back in your seat.

however -

when i added my fmic, i took the car for a drive around the block with the front bar and reo off -it was boosting almost 1 bar! and this was with the standard solenoid, and standard ecu - it flew! but as soon as i put the reo and front bar back on, boost dropped back to 9psi

Im runing a remapped ecu now, good bang for buck, and its roadworthy :P

Yep, bypass it. You can still wind in decent boost with the stock ECU so long as your EBC is set up correctly... probably better off going that route to be honest. Then when you want/can afford go for a full fledged aftermarket ECU and get a tune, then you'll really see some gains!

How much is safe? I might have to do some homework on ebc's... :P

certainly did Steve

yeah the stock ecu is definitely a setback with boost - rich & retard really sucks. power wasn't being distributed nicely through the rev range - anywhere from 3500 - 6000 rpm was very flat, but as soon as you passed 6000, this big hit of power would chuck you back in your seat.

however -

when i added my fmic, i took the car for a drive around the block with the front bar and reo off -it was boosting almost 1 bar! and this was with the standard solenoid, and standard ecu - it flew! but as soon as i put the reo and front bar back on, boost dropped back to 9psi

Im runing a remapped ecu now, good bang for buck, and its roadworthy :P

The only thing that annoys me really is the fact it hits the boost limit (5 psi I think...?) under 3000 RPM since the AM dump/front/cat and 3-3.5" catback has gone on. Would like just a little extra between 2800(approx)-5000 RPM.

Nice Luke...stretched rubber on the rears? :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...