Jump to content
SAU Community

Recommended Posts

dale, where did u get your catch can made?

want a setup similar to yours.. with the breather etc..

cheers

It's just a Greddy copy can that i got off eBay for $45. i added the filter though, i just drilled and tapped a hole then used a -8 barbed fitting and a filter that i got from Autobahn for $8. If you do the same though make sure you use a -10 size fitting as the filter is to small on mine and when i put the car back together i'll be making it bigger.

I have to make up the brackets to hold the can as well.

dale, where did u get your catch can made?

want a setup similar to yours.. with the breather etc..

cheers

yo, head down to see niko at smooth.

he made me a perfect catch can for my ca in the drift car.

big and user friendly and didnt cost much at all and they fitted it up with new lines since my old one was too small.

Took some pics of the new toy yesterday .... pity it was raining and filthed it up before the photos (despite it being washed 2 hours earlier :) )

Fave photo

Very nice - I've seen a few people use that one - where is it at?

I'm having injector issues AGAIN. 3 weeks after replacing 2, another 2 (not replaced) have started leaking. pissed off

and i called main north nissan. OEM nissan 444cc injector = $437 EACH!!!!1one... and then I find a place in japan that can post me a set of Nismo 600cc's for $990. Geee, whatever shall I do? :happy:

Just sucks - have to drive the car as little as possible in the meantime. *grumble* already the car is going in this weekend to get the spoilers and bumpers painted, couple dents removed, the rear bumper reo fixed from last sundays rear-end accident, calipers and hubs powdercoated and the oil relocation kit relocated (its in a really daft place atm, very low to the ground - good for capacity but not great when you go to park and have a concrete bollard hit the oil filter...)

-D

and i called main north nissan. OEM nissan 444cc injector = $437 EACH!!!!1one... and then I find a place in japan that can post me a set of Nismo 600cc's for $990. Geee, whatever shall I do? :happy:

-D

Get a set of 570, 660 or 750's off these guy for $780. And they're in Australia.

http://www.injectorsonline.com/indivprod.p...=74&scid=12

Edited by D_Stirls
just go for a 3071R Matty, very similar compressor but already fitted with the T3 rear.

3071R wont have the responsiveness i want though (its going on a basically stock internaled RB20). I mean, we could make the new mani with a T25 flange, but that stuffs me for future upgrades

*edit*

Abe, 3076R is worse for me lol

Edited by Matty 31
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...