Jump to content
SAU Community

Recommended Posts

oooo... fabrication of sump extension almost complete, short block almost complete!!! =D

just need to sell my PFC, anyone?

How much haha? Swap ECU's + cash your way maybe if the price is right although I'm not really fussed if I keep the standard ECU, plan on keeping mine as is really and just maintain its cleanliness

Awesome video for all you GT-R lovers;

Z9 Filter if it's a 225, 245 or 265 6 cylinder, which is actually the same thread as RB's use but a lot bigger.

Our old dirt circuit Open Wheeler was running a Jeff Juring built 265 HEMI making around the 350HP mark.

Ahh, have always had a soft spot for those Hemis....do you recall what was done to it Dale?

We had a cam grinder and used to put our own profiles on the cam lobes with various masters to choose from in the cupboard, then get get them nitrided.

Messed around with the hydraulic lifters in those things and turned them into solids just so we could get ridiculous lifts, durations & overlaps that'd shake the whole car on idle...strictly for drags though.

Go swimming in the 4wd did we Matt haha

seems one of my last escapades where i had the bottom of the doors below water level by at least an inch and a bit was the icing on the cake. splashed water up inside my door, got into my high/low pass filters (that were mounted in the stock speaker location high in the door). Was alright until i re-fitted the tweeter that had fallen off, which killed the filters i reckon

managed to kill both tweeters as well (were reading 1ohm)

Congratulations to Craig for the arrival on the new one mate

so whos interested in paintball? I wanna organise one closer to christmas or just after, when the weather gets a bit more predictable.

Definitely interested

:D This is gonna sound pretty gay. But for some reason Damo, You were in a dream of mine last night. And you drove a VT commodore.

Yep your right it does sound gay

Yeah, i only tuned it to 10.5psi to increase the life of the turbo. 12psi is at peak efficiency for a stock rb25 turbo.

I have been running on 12 psi for almost about a year now Damo and the turbo was still going strong making 214 odd so rwkw.....for 10psi i think that figure is quite low mate.....as i remember making 180rwkw on 7psi....hopefully whatever it is you can get it sorted out mate

Congratulations to Craig for the arrival on the new one mate

so whos interested in paintball? I wanna organise one closer to christmas or just after, when the weather gets a bit more predictable.

Definitely interested

:D This is gonna sound pretty gay. But for some reason Damo, You were in a dream of mine last night. And you drove a VT commodore.

Yep your right it does sound gay

Yeah, i only tuned it to 10.5psi to increase the life of the turbo. 12psi is at peak efficiency for a stock rb25 turbo.

I have been running on 12 psi for almost about a year now Damo and the turbo was still going strong making 214 odd so rwkw.....for 10psi i think that figure is quite low mate.....as i remember making 180rwkw on 7psi....hopefully whatever it is you can get it sorted out mate

there are times (not many) when the north scares and confuses me.

example, on my way home from a 31 club meet, just drove past elizabeth, about 30 seconds away from my intersection, and im sitting behind a vz commodore, both of us sitting just over the limit, and the rear passenger of the commodore decided walking might be a better way to get home and throw himself out of the car.

onto the asphalt.

at 90k's an hour.

without a shirt on.

so both me and the commo throw on the skids and stop, i jump out and run back to the guy, the 2 other blokes in the commo do the same, we get to the guy, hes got blood all over his face, his back and arms are all cut up, and yeah, blood everywhere. and the 2 blokes just throw him back into the car, thank me for stopping, and drive off in a casual way as if all is fine and f**king dandy. f**k.

Just like any other night out for these guys :)

At least the bloke was considerate enough to leave the booze and ciggies in the car before bailing! :)

I lived in Lidabeff during high school ... feral as! :P

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...