Jump to content
SAU Community

Recommended Posts

oh by the way

will anyone majorly crack the shits if i put a couple of car for sale ads on our local For Sale thread if there for a mate. He's got 2 cars he needs to go to good homes, and doesnt have a computer of his own to register on a forums and post them himself. I went and took the photos last nite for him too

any objections?

from what ive been told its an 808 with pretty much every RX3 part thrown at it

no major pics of it, but it was a drag car a few years back (my mate's had it for 4 or 5 years now, so before that)

only pics are in the background of his VT that he's selling

Edited by Matty 31
from what ive been told its an 808 with pretty much every RX3 part thrown at it

no major pics of it, but it was a drag car a few years back (my mate's had it for 4 or 5 years now, so before that)

only pics are in the background of his VT that he's selling

Yeh nah thats alright just interested as a mate has a 808 coupe and another mate has a 808 wagon!!

well i brought the headunit. got like 300 bucks off recommended retail.

started installing it. almost finish. couple more hours and i will be done i reckon.

driving home found out i have no indicators so took the most straight route, so gonna have good fun on the way 2 work tomorrow.

hopefully all wired up for the cruise tomorrow night. wooooo

should be all running. i think its because i took out the hazards switch and left the plug hanging there and havent connected it back up yet. so once i plug that back up i hope its all good.

might have to try hand signals if they dont work lol

hey ash where did you guys finish up?????

how f*ing dirty did were the idiots who won, i had 2 massive accidents and they were both caused b the same guy.

managed a 21.94 so i was a happy man, guess i'll stick with 4th (even if Dan did pit 2 laps early)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...