Jump to content
SAU Community

Recommended Posts

  • Replies 160
  • Created
  • Last Reply

Top Posters In This Topic

i'd love to see a race with the gtr's and the v8's, still reckon the gtr's will give them a nice can of whoop ass tho :rolleyes: hehe

this is my favourite video of bathurst :P enjoy!!

Edited by vinnie34gtt

just out of interst i have seen it writen in MOTOR magazine or some street car mag, what 1/4 mile does a v8 supercar do? I think when i read it they had the specs for a VX.

Also what kind of power would the 91 bathurst gtr have been putting out ?

My comments on page 2 were in reference to plucking say the Winfield GTR out of retirement in its original 1990-1991 form and placing it on the grid of the 2007 Bathurst 1000 still with the same brakes, tyres, fuel etc as what it was using back then.... not putting a 2007 spec Brembo brake package on it along with R34 N1 turbo's (they didn't exist in 1991) and all the other gadgets that are available today.

It's already been mentioned that the laptimes of the GTR back then are about 5-6sec slower than what was done this year at Bathurst so unless it was raining the 2007 V8SC would smack the living hell out of a 1991 prep'd GTR (if their were no safety cars the GTR would be down by atleast 5 laps).

Hell even Jack Perkins would beat Jim Richards in the Winfield GTR.

Edited by benm
i'd love to see a race with the gtr's and the v8's, still reckon the gtr's will give them a nice can of whoop ass tho :thumbsup: hehe

this is my favourite video of bathurst :) enjoy!!

unreal thats for sure.i didnt realise that they did it so easy..i was 5 when they where racing...

There is no way a '92 GTR would touch a V8 Supercar around Bathurst. Especially seeing as there was no Chase down Conrod straight during Group A days.

If these cars were doing 5 seconds slower without the Chase then imagine how much slower they would be with it!

And whoever said 14 seconds slower around Sandown isn't much should go back to playing Gran Turismo.

I heard a while back that He's contractually forbidden to ever be seen in a Skyline on a race track again

Does Skaifey still own HRT? If so, contract or not, it still wouldn't be in his best interest to be seen in a racing Nissan...especially the one associated with decimating the type of car the team he owns still competes in.

Does Skaifey still own HRT? If so, contract or not, it still wouldn't be in his best interest to be seen in a racing Nissan...especially the one associated with decimating the type of car the team he owns still competes in.

I think he owns a bit of it. He did a dodgey deal with Tom Walkinshaw.

well to be honest the times the v8 supercars run now are dissapointing compared to years gone by.15 or more years later and they are only 5 secs a lap faster.Tyre improvements and track resurfacing over the years would have helped.Try taking all those ridiculous wings off the supercar and I believe it would be considerably slower around the mountain than the GTR.They are currently hitting 297kmh down conrod. Well dick Johnson was pulling those speeds way back in 1990.And it didnt corner as quick as supercars..So it would leave forest elbow at a slower speed than current cars but manage to reel them in by the chase..

There is only 1 king of touring cars

Long live King GTR

well to be honest the times the v8 supercars run now are dissapointing compared to years gone by.15 or more years later and they are only 5 secs a lap faster.Tyre improvements and track resurfacing over the years would have helped.Try taking all those ridiculous wings off the supercar and I believe it would be considerably slower around the mountain than the GTR.They are currently hitting 297kmh down conrod. Well dick Johnson was pulling those speeds way back in 1990.And it didnt corner as quick as supercars..So it would leave forest elbow at a slower speed than current cars but manage to reel them in by the chase..

There is only 1 king of touring cars

Long live King GTR

well said indeed

There is no way a '92 GTR would touch a V8 Supercar around Bathurst. Especially seeing as there was no Chase down Conrod straight during Group A days.

If these cars were doing 5 seconds slower without the Chase then imagine how much slower they would be with it!

And whoever said 14 seconds slower around Sandown isn't much should go back to playing Gran Turismo.

actually you are incorrect, the chase was in place when the GTRs raced. The chase went into conrod straight after 1986 when privateer mike bergman had a massive spin caused his VK Group A lifting off the track over all the bumps on conrod

Exactly they are race cars with shells on them. Can't really compare. If other cars were allowed in, they would have to be same speed as the v8's it would get boring if 1 car was faster than the others all the time.

Production car racing is what you guys want - see Duncan in his GTR :)

Duncans one is broken more often than mine :P

the winfeild GTR would have lung cancer by now anyway :(

:happy:

Yeah for sure the GTR would get smashed, but spend the same budget on both a V8 and a GTR then go racing - THAT would be fun to watch

as for the quarter mile comparison,i was at calder park when they had a v8 supercar vs auscar vs r32 gtr down the quarter. and although i was a v8 fan back then therefore my memory is only vivid the gtr puller 10.8 and the v8 group a pulled 11.8 obviously they were all wearing racing slick tyres whith very little side wall give and the cars were all set up fot circuit not quarter mile. so probably a little unfair to compare. this was in the very early nineties ,might of been the old easter nats before sandown correct me if im wrong.

you are all forgetting 1 thing. at times the gtr was getting beaten by a 4 cylinder ford sierra, that didn't have 4wd. there were only a few v8 fords when the gtr was racing and they were old models as ford made no v8 when the gtr was racing.

and you can't compare the times of some street cars to a v8 supercar. people with street cars can do whatever mods they want. the v8 supercars are limited to what they can do. they have to limit the revs to 7500rpm, they have weight restrictions, suspension restrictions, ecu restrictions, tyre restrictions, diff ratio restrictions, etc. if someone went all out and didn't have to abide by any of them i'm sure they could go a hell of a lot faster. hell, i'm sure f1 cars could go faster if they didn't have as many regulations either.

and the formula holdens are even faster than the v8 supercars. at eastern creek the formula hold lap record is nearly 10 seconds faster than a v8 supercar, and a porsche carrera cup car record is less than 3 seconds slower than the v8, and at bathurst they were lapping as fast as a lot of the v8's even though they were about 20km/h slower down the straight.

you can't compare 2 different catagory race cars evenly because they have a lot of limiting factors. they have so many rules and regulations they have to follow that there is no way that they can be evenly compared.

but i remember a few years back in the GTP races at bathurst there was a few gtr's and they were getting beaten by a lot of other cars (and not just ones in higher classes)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...