Jump to content
SAU Community

Hiclone - ? - Another Myth To Grab Average Car People? Snake Oil?

Zebbie

By Zebbie,
in Engines & Forced Induction

 Share

Recommended Posts

Zebbie Rising Star

Zebbie

Posted
Posted (edited)

I'm assuming this is just like all the other 'Gain power now, save fuel..'

http://www.fuelsaver.com.au/hiclone.php

Thoughts?

After looking through the web site, it all feels like rubbish, but......

From web site....

Turbo Engines

For Turbo vehicles we suggest installing Hiclones in two locations.

The first Hiclone is installed near the intake manifold; after the Turbo or intercooler; to improve combustion and economy.

The second part is installed near the air filter, before the Turbo. This part helps the Turbo Impellor to spin, reducing Turbo lag, bringing the boost in around 400-500rpm earlier.

It is also possible to install extra Hiclones in power or economy positions to further improve the vehicle. We have a lot of customers with up to 6 Hiclones installed on one vehicle.

Please note the line - AFTER THE Turbo ??!!!

Edited by Zebbie
Medium Dave Proficient

Medium Dave

Posted
Posted

I read an article a little while ago where they tested a bunch of these power enhancing/fuel saving type devices in a stock car on a dyno, and the best you could hope is that they did nothing, most of them restricted some power and one even set the test car on fire :)

Beer Baron Grand Master

Beer Baron

Posted
Posted

surely you jest?!?! I mean look at the fking thing. and the diagrams... ooooh swirling air.... just get out a $100 note and set it on fire. you will get all of the benefits of a hi-con with the potential for engine damage.

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted (edited)

i've bought a new RB20E long and i'm building it up to run quad hiclones... should run 9's all day

Edited by joeyjoejoejuniorshabadoo
xRHETTx Mentor

xRHETTx

Posted
Posted

This is my favourite quote from their website:

The ECU will need time to re-learn (about a week) this is why dyno shops who test products by doing one run without, and one run with any product don't know how to use a dyno on an EFI car.

So basically they are saying everytime you do back to back dyno tests you are wrong, and thats why no one has proof their product actually works.

Utter BS

dmr Mentor

dmr

Posted
Posted
This is my favourite quote from their website:

The ECU will need time to re-learn (about a week) this is why dyno shops who test products by doing one run without, and one run with any product don't know how to use a dyno on an EFI car.

So basically they are saying everytime you do back to back dyno tests you are wrong, and thats why no one has proof their product actually works.

Utter BS

anything to make a dollah!

PM-R33 Grand Master

PM-R33

Posted
Posted
I read an article a little while ago where they tested a bunch of these power enhancing/fuel saving type devices in a stock car on a dyno, and the best you could hope is that they did nothing, most of them restricted some power and one even set the test car on fire :D

:w00t:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...