Jump to content
SAU Community

Hiclone - ? - Another Myth To Grab Average Car People? Snake Oil?


Recommended Posts

I'm assuming this is just like all the other 'Gain power now, save fuel..'

http://www.fuelsaver.com.au/hiclone.php

Thoughts?

After looking through the web site, it all feels like rubbish, but......

From web site....

Turbo Engines

For Turbo vehicles we suggest installing Hiclones in two locations.

The first Hiclone is installed near the intake manifold; after the Turbo or intercooler; to improve combustion and economy.

The second part is installed near the air filter, before the Turbo. This part helps the Turbo Impellor to spin, reducing Turbo lag, bringing the boost in around 400-500rpm earlier.

It is also possible to install extra Hiclones in power or economy positions to further improve the vehicle. We have a lot of customers with up to 6 Hiclones installed on one vehicle.

Please note the line - AFTER THE Turbo ??!!!

Edited by Zebbie

I read an article a little while ago where they tested a bunch of these power enhancing/fuel saving type devices in a stock car on a dyno, and the best you could hope is that they did nothing, most of them restricted some power and one even set the test car on fire :)

surely you jest?!?! I mean look at the fking thing. and the diagrams... ooooh swirling air.... just get out a $100 note and set it on fire. you will get all of the benefits of a hi-con with the potential for engine damage.

i've bought a new RB20E long and i'm building it up to run quad hiclones... should run 9's all day

Edited by joeyjoejoejuniorshabadoo

This is my favourite quote from their website:

The ECU will need time to re-learn (about a week) this is why dyno shops who test products by doing one run without, and one run with any product don't know how to use a dyno on an EFI car.

So basically they are saying everytime you do back to back dyno tests you are wrong, and thats why no one has proof their product actually works.

Utter BS

This is my favourite quote from their website:

The ECU will need time to re-learn (about a week) this is why dyno shops who test products by doing one run without, and one run with any product don't know how to use a dyno on an EFI car.

So basically they are saying everytime you do back to back dyno tests you are wrong, and thats why no one has proof their product actually works.

Utter BS

anything to make a dollah!

I read an article a little while ago where they tested a bunch of these power enhancing/fuel saving type devices in a stock car on a dyno, and the best you could hope is that they did nothing, most of them restricted some power and one even set the test car on fire :D

:w00t:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
    • With ordering the belt, you're doing water pump and the idler and tensioner at the same time too yes?
    • This is just a dumb way of keeping the wastegate closed to make more boost. Undo it and either follow the factory setup or redo it properly. Manual boost controllers just use a spring preload to determine when to close in response to boost pressure so it no longer vents to atmosphere.
×
×
  • Create New...