Jump to content
SAU Community

What 1/4 Mile Time? R33gtr 300kw At 4 Wheels

Bakes

By Bakes,
in Engines & Forced Induction

 Share

Recommended Posts

Robo's Mentor

Robo's

Posted
Posted
what would a 33gtst with some slicks do with 360 - 380 rwkw ?

bit off topic.. just wondering what i should be aiming for

Well with that type of power and slicks and a good start, a 10 would have to be on the cards. Would be difficult to achieve but if driven correctly you would have to go close.

wrxhoon Grand Master

wrxhoon

Posted
Posted
what would a 33gtst with some slicks do with 360 - 380 rwkw ?

bit off topic.. just wondering what i should be aiming for

It will be a fair bit quicker than the GTR with the same power as long as you use drag slicks . You should do a 10 with little practice on starts .

I know some people will argue otherwise....before you ask why the GTS is lighter and you have a lot less drag because you are only spinning 2 wheels not four .

This is the reason GTRS with the same power as STI's have a better 60ft time . The suby is a true 4WD, the GTR is not .

Of course if the GTS and the R both have street tyres the R will be quicker ET but the GTS will have higher trap speed .

As for a street GTR with 300 RWKW ( even 300AWKW for that matter) doing a flat 11, I would like to see that , you don't have a hope in hell ....as long as the car is full street weight you won't go near it.

fieds83 Rising Star

fieds83

Posted
Posted (edited)

Series 3 R33 gtr FULL street trim, 368awkw=11.1@130mph. This was on 19's with average driver, shit rubber, i dont have the timeslip so cant tell you the 60 foot time but i can tell you there is spin and torque steer in 1st gear so could go quicker on better rubber.

Edited by fieds83
wrxhoon Grand Master

wrxhoon

Posted
Posted
Series 3 R33 gtr FULL street trim, 368awkw=11.1@130mph. This was on 19's with average driver, shit rubber, i dont have the timeslip so cant tell you the 60 foot time but i can tell you there is spin and torque steer in 1st gear so could go quicker on better rubber.

This has a 10 on street tyres with a resonable 60 footer. We did 11 flat at 129 MPH in a series III GTR , street tyres, full street trim, weight and 18" 34 GTR rims , the car was making about 360 AWKW . Never went bact to crack a 10 because of the cage issue, car was built to be a street stock looking car , not a drag or race car..

Spiining all the way in 1st, still managed 1.8 60ft.

mass_iv Grand Master

mass_iv

Posted
Posted (edited)

tough subject... im thinking of taking my new beast out to the strip...

what you think id get in an R34GTR vspec, mods are: HKS 100mm FMIC, HKS cat back with punched out cat, HKS ebc on 1 bar, aftermarket panel filter (not sure which brand), HKS coilovers, tyres are 285's all round pretty good tyres again not sure wat brand... what wud i be looking at running??? oh and car is running with a mines rom tune, made around 240awkw

Edited by mass_iv
mass_iv Grand Master

mass_iv

Posted
Posted (edited)

thanks mate, yeh i do, not many good ones yet, but here's a link to a good shot taken before i bought it... has diff plates on it now:

http://transelite.net/images/PICT0392.JPG

others are off camera phone the night i picked it up... little dodgy hehe:

http://img219.imageshack.us/my.php?image=picture008qc2.jpg

http://img223.imageshack.us/my.php?image=image006vq0.jpg

Edited by mass_iv
wrxhoon Grand Master

wrxhoon

Posted
Posted
tough subject... im thinking of taking my new beast out to the strip...

what you think id get in an R34GTR vspec, mods are: HKS 100mm FMIC, HKS cat back with punched out cat, HKS ebc on 1 bar, aftermarket panel filter (not sure which brand), HKS coilovers, tyres are 285's all round pretty good tyres again not sure wat brand... what wud i be looking at running??? oh and car is running with a mines rom tune, made around 240awkw

Flat 12 @ 114 MPH

mass_iv Grand Master

mass_iv

Posted
Posted

thanks jerry i thought so... id be pretty happy with that... u seem to know wat u are talking about... hows your beast? i remember the day u came over i was like :) that color is awesome and the interior is sex!!!

wrxhoon Grand Master

wrxhoon

Posted
Posted
thanks jerry i thought so... id be pretty happy with that... u seem to know wat u are talking about... hows your beast? i remember the day u came over i was like :) that color is awesome and the interior is sex!!!

You will need a little practice on your starts to do that but as you don't have heaps of power it will be easy, you just need the right RPM so you get enough wheel-spin not to bog down and not to much so you don't move .. R34's are a little quicker than 33's ( both same power cars ) because of the 6 speed box . It has beeter gear ratios and you don't go into 5th so you change the same amount of gears..

My car is still going great, no issues there but I don't get to drive it much, I'm not going to do any mods to it , I'm happy as it is .

I may look at the new GTR if and when it comes here, depending on a test drive and price .... maybe I shouldn't .... a Magna will suit me better I think....maybe a Camry.... Maybe I should stick to my GT... I don't really know what I want ...

mass_iv Grand Master

mass_iv

Posted
Posted

sounds good mate... same with me, i dont really want to wreck the car, its too nice to destroy with huge mods.. ill prob complete the exhaust and a few little things here and there like cam gears and maybe PFC but thats it... nothing major it goes hard and drives smooth.

  • 3 years later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Matt Z
      SAU NSW - Archies Flame Grille Meet & Cruise to Kurnell

      By Matt Z · Posted

      Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • bcozican
      WTAC 2025

      By bcozican · Posted

      i will be there 😁
    • patrickxdf12
      Squeaking clutch/throw out bearing

      By patrickxdf12 · Posted

      Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...