Jump to content
SAU Community

Recommended Posts

When I got my R33, it came with a heap of std bits and peices [which I sold off].

One of the boxes was for a Nismo Selective LSD Part No. 38420-RS200 [i kept the box].

1. What I want to know, is this a 1.5 or 2 way diff centre? [What I read on the www was some Nismo units could be either depending on how you set them up].

2. Is it a mechanical diff?

3. How tough is it?

All I know is that it hasn't broken yet, it loads up both wheels every time [corners and acceleration], it clunks and skips in corners, and when you have it on the hoist and spin the back wheels, they both rotate in the same direction.

If anyone can info me up or give me a link I'd appreciate it. I basically want to know what I have.

Link to comment
https://www.sau.com.au/forums/topic/189181-nismo-selective-lsd-diff/
Share on other sites

Could only find 2 references to this part # 38420-RS200 and also 38420-RS201 (in japanese) , mentions it is a selective model, no mention of 1.5 or 2, looks like they were available in both.

Also have a read of this

http://classiczcars.com/forums/showthread.php?t=8305

http://www.poweraxel.com/nismo/news/news2000/n000040.html

Looks like it is an old short lived model, perhaps a Nissan dealer could look up the part # or someone with an old Nismo catalogue.

Edited by chook

Yeah, what I found was that you could do something to it and make it a 1.5 or a 2. From what I understand, you could do this any time you wanted [as long as you have a hoist and spare couple of hours]. But it didn't say what it was you did, maybe reversed a plate or something - not that important anyway, cos I'm happy with it as it is, so I'll leave it.

Thanks for the links. I'll go have a read now.

The nismo diff you have is basically just an uprated factory GTR type LSD. It should be fairly smooth operating; light throttle it won't lock/clunk and skip. I.e roundabouts car parks etc. They are THE best street LSD in my opinion as they are so smooth and streetable. ;)

You can buy the upgrade clutch packs from Nismo and slap them in the GTR diff. I believe Nengun also sell these.

They are super smooth on light/cruise throttle; give it just that little bit more throttle and it will lock nicely and send a little shudder/skip feel through the car. So really easy to drive around police.

If it clunks/chatter at light throttle change the oil and or push an lsd additive in to it as they are not supposed too.

I remember a while back redline wasn't that crash hot in CLSD's as they clunked. I think I read that here and on a Ford forum. Great for gearbox's not that crash hot for diffs.

The Castrol full synth oil SAF-XA is good and already has the LSD friction modifier in it.

I believe the Redline doesn't have the friction modifier in it and requires redlines additive for the operation to be smooth.

So possibly just add some of redlines friction modifier. Or head down to ford and see if they still stock the ford additive. :)

Just don't add too much; slowly increase the dose. :rofl:

Thanks Cubes, I'll get it hot and change the oil, probably due anyway. I guess Bumblebee was right as well.

But, it did it from when I brought it, so the oil in it from japan was no good either? And it doesn't chatter too much, but you can feel it.

As I said, I'm happy with it, it locks up and drives great when needed. It also helps in a strange way when you power on through corners etc, makes the car feel very predictable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, if the headlights' cutoff behaviour (angles, heights, etc) are not as per 6.2.6.1.1 without automatic levelling, then you have to have to have automatic** levelling. Also, if the headlight does not have the required markings, then neither automatic nor manual adjusters are going to be acceptable. That's because the base headlight itself does not meet the minimum requirement (which is the marking). ** with the option of manual levelling, if the headlight otherwise meets the same requirements as for the automatic case AND can be set to the "base" alignment at the headlight itself. So that's an additional requirement for the manual case. So, provided that the marking is on the headlight and there is a local manual adjustment back to "base" on the headlight, then yes, you could argue that they are code compliant. But if you are missing any single one of these things, then they are not. And unlike certain other standards that I work with, there does not seem to be scope to prepare a "fitness for purpose" report. Well, I guess there actually is. You might engage an automotive engineer to write a report stating that the lights meet the performance requirements of the standard even if they are missing, for example, the markings.  
    • Vertical orientation   6.2.6.1.1. The initial downward inclination of the cut off of the dipped-beam to be set in the unladen vehicle state with one person in the driver's seat shall be specified within an accuracy of 0.1 per cent by the manufacturer and indicated in a clearly legible and indelible manner on each vehicle close to either headlamp or the manufacturer's plate by the symbol shown in Annex 7.   The value of this indicated downward inclination shall be defined in accordance with paragraph 6.2.6.1.2.   6.2.6.1.2. Depending on the mounting height in metres (h) of the lower edge of the apparent surface in the direction of the reference axis of the dipped beam headlamp, measured on the unladen vehicles, the vertical inclination of the cut off of the dipped- beam shall, under all the static conditions of Annex 5, remain between the following limits and the initial aiming shall have the following values:   h < 0.8   Limits: between 0.5 per cent and 2.5 per cent   Initial aiming: between 1.0 per cent and 1.5 per cent   0.8 < h < 1.0   Limits: between 0.5 per cent and 2.5 per cent   Initial aiming: between 1.0 per cent and 1.5 per cent   Or, at the discretion of the manufacturer,   Limits: between 1.0 per cent and 3.0 per cent   Initial aiming: between 1.5 per cent and 2.0 per cent   The application for the vehicle type approval shall, in this case, contain information as to which of the two alternatives is to be used.   h > 1.0   Limits: between 1.0 per cent and 3.0 per cent   Initial aiming: between 1.5 per cent and 2.0 per cent   The above limits and the initial aiming values are summarized in the diagram below.   For category N3G (off-road) vehicles where the headlamps exceed a height of 1,200 mm, the limits for the vertical inclination of the cut-off shall be between: -1.5 per cent and -3.5 per cent.   The initial aim shall be set between: -2 per cent and -2.5 per cent.
×
×
  • Create New...