Jump to content
SAU Community

Recommended Posts

  • Replies 169
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Anyone have pics of the GMS R32 with the front wheels off so I can see the front suspension setup. If its anything like the rear setup it not exactly std nissan.

Cheers

cannot find any in my collection.....may be earlier on in this thread..... if you wait a couple of weeks(19th-20th sept) it should be up at Lakeside racing.

  • 3 months later...
From memory 1984 (Rovers) was churns and 1985 (Jags) was an overhead rig, no maybe we didn't use overhead rigs until the BMW's. Too many Bathursts ago, 1,000's and 12 Hour races to remember, maybe time I got the video out again myself. When they were used, the churns were filled from 44's, which were on scales to record their usage. My pit job was crunching numbers, TWR had their own technicians, no Aussies got to touch the cars much at all.

is there much demand for the 84 rover as per pic as shown in post no.86?

my uncle passed in jan this year & handed this car to me just before, biege with only 75000km, 3.5ltr v8 with 5speed, forged bottom end, touring car style wheels as per pic - it was his pride joy :P

One of these went on ebay about 4 years ago for an astounding AUD$104! For a sticker!

I picked one up for under AUD$10, also from evilbay. You don't see these around very often now.

i'd like 1 of these stickers for my big toolbox, maybe even the back window of my gtr...where is it best to get 1, ebay?

Mine was free, and will never be sold. Lived a few doors down from a mechanic who used to work on the GMS cars, whom now works for Apprenticeships Victoria. His name has slipped my mind at this moment.

I guess after seeing a stream of modded 31's, a 1600 and stagea out the front he thought I would appreciate it!

i'd like 1 of these stickers for my big toolbox, maybe even the back window of my gtr...where is it best to get 1, ebay?

I got mine off evilbay but they come up so infrequently - in fact I've only ever seen two there - the one that went for over AUD$100 (it actually went for $102 now I've checked!!!) and mine.

Attached is a resized scan. Mine doesn't appear to have the Nissan logo on the left either.

post-9671-1257759369_thumb.jpg

Edited by ajrichar

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...