Jump to content
SAU Community

Recommended Posts

Haha! Nice work Ben.

I think the P1 guys are talking about using one of their R8's for Dutton next year as well. (They have 2 - one of each gearbox type).

Oh - and speaking to Mossy yesterday it sounds like they are going to go with a "battle" style event like I run at our club DECA days as one of the events next year. That should be some fun.

Check this link for a sample of our battles.

  • Replies 79
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hmmm, I was thinking they'd take a huge toll on the alloy rotor carrier we're running? I didn't touch the handbrake at all for this reason, with the exception of one occasion when it just cocked and locked the inside rear, ran it wide, turned into a total f**k up. Or is this not an issue?

Haha - if you READ THIS you will see they mention a forth coming name change. That is the new name.

There has been a bit of work going on to try and take this series to the next level. Some of the plans I have been told sound pretty exciting including the desire to run a "super special" stage on the Saturday night in the form of an event like we have seen in the past for Prolog stages at George Town for Targa Tas and Marysville for Mt Buller. If they can pull it off and have a couple of "feature" events at each round I am sure the series will only go forwards.

And Gav - at this stage it looks like we'll be bringing the Blue car over west next year too. :(

Never seen the value in Dutton. Nor the attraction - far too many 'khana style events. It would bore me to tears.

QLD Challenge has 7 or 8 speed tests every year including up to 3 closed road 'special stages', normally only 1 'khana test, and the rest are on racetracks. All for around $140 entry. That's more like it!

  • 2 weeks later...

The appeal is in there is a wider range of driving events and the likes of Peter Fitzgerald, Luffs etc get beat becuase they can only do the track stuff. I suck at the motorkhana stuff, but do ok at the higher speed stuff. But thats the appeal, doing well where you are strong and doing the best you can where you suck.

There is no Vic challenge...so you have fun where you can

I have competed in one of the QLD rounds before and definatly would not enter another dutton. I found that the event seemed to be more a money making exercise for the organizers than about putting on a good event for participants as seems evedent by the ever increasing entry fees. And i defenatly would agree that the amount of driving for the amount of money spent is definatly not good value. I have personally found that events put on by motoring events managment (the origanal organizers of dutton before the rights were onsold) such as the indy rally and grand prix rally ect to be much better value for money and more competitor focussed and the entry fees are far more reasonable.

  • 1 month later...

Just got an email update...

2008 EXPRESSIONS OF INTEREST

The 2008 Alphera Dutton Rally calendar has been released. Get your entries rolling in for Victoria NOW. This event is set to be a sellout with the first of only 3 HUGE events in 2008.

ROUND 1 Victoria: May 16-18th, 2008

ROUND 2 Western Australia: July 25-27th, 2008

ROUND 3 New South Wales: November 28-30th, 2008

Pricing has been announced and the expression of interest form is available here.

Team Entry Fee - $3175

Driver Only Entry Fee - $2375

We are planning 2008 to be our biggest and most exciting year ever. Be quick and confirm your expression of interest with a deposit now!

Price doesnt seem to have gone up that much for driver only.

Likewise with Ryan and myself. If we can get some sponsors on board that will cover nearly everything we will do it if not then no chance. I wanna go OS this year and cant afford to folk out my folding for a grand total of 15 minutes track time.

Indeed. $1600 each for a team entry is pretty outrageous. I enjoyed the last one, and the "social" side is good, but add flights/fuel/accomodation etc, and it's a 3k weekend for me.

son of rajab knows how many blondes that can get me in a hot tub up at Noosa for a weekend.....

Yeh, the ppl i was talking to re sponsorship are not filling me with confidence. Not returning calls etc, so it looks like i will park it. I didnt really expect anyone to pay for my motorsport, but woudl have been nice...oh well. My 44days (working days) leave is approved....so im sure i wont be worring about Dutton when drunk and hopefully skinny dipping with Eastern European girls :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • PRICE  : $1400 LOCATION   : NSW Central Coast FIT  :  All Nissan 350Z type Z33 and Infinity G35 Coupe. See delivery note. Hi, brand new, unused, still in the box.  ($1850.00 is what i paid ) My bad luck !!! I thought my right front  Bilstein was cactus so i bought the ST 's to replace all.  Turns out the right front is fine ( loose mounting after service  by a well known importer of Bilsteins ) So im selling the ST's. They are made by KW ( no intro needed ) . Iam on the Central Coast and im willing to meet up in Sydney metro, within reason and Newcastle.
    • Yep, yeah would need to do the flywheel although the 6 bolt NA clutch can handle a 20de if just wants to replace the stocker.
    • No it's fine. Heat sleeve is a thing. With oil running through it it is unlikely. Engine off heat soak can be a thing though. There is no way that you have a leak through the hose. That has pressure behind it and any small hole will turn into a large one in very short order. It is so much more likely to be leaking from the connection.
    • Really? That's piss weak. I didn't know they hobbled the shitboxen that badly. OK. So probs need to buy a flywheel too. But that's not too bad.
    • Hi all. I already posted some newbie-ish questions here and there but this will be my first "big" post. Last summer I went and fulfilled a kind of childhood wish, because I just thought I needed this experience in my life no matter what. The car I bought is a mildly modded 1995 BCNR33 Vspec. It was repainted to a metallic orange color all around and it had all windows reseated. Not so well done black respray in the trunk and a metallic black in the engine bay. From outside it looks very nice except for a minor paint error on the roof and the rear spats needing new adhesive tape. The inside is pretty clean and no broken plastics, missing or faded buttons. Even the adjustable mirrors and trunk antenna work like a charm. Despite a moderately long list of issues I don't (yet) regret buying this car. Most mechanical problems are just due to age, like worn rubbers here and there. The underside sadly has lots of corrosion, especially to the back. It looks like it either has been driven in the winter for a while or it lived near the saltwater in Japan, the rust is nothing terrible but it'll require to be looked after. Mostly panel gaps and all the mounted components underneath are a bit crusty, but I don't think anywhere has progressed so badly that there's going to be holes. Front right jacking rail is crushed and needs some care so it doesn't develop into a rust crater at some point. Worst part is definitely the strut towers. I thought they looked fine but after taking off the strut bar I noticed that it actually started bulging up on the passenger side. Probably would have passed on the car or negotiated down by some thousand Euros more if I had noticed this before buying, but here we are. Trunk area also has signs that there was a water leak to the interior once but nothing too crazy, I guess lots of Skylines had this at some point. As for the list of (known) issues, I'll try to make this compact. I hope the coloring is self explanatory. Mechanical: -Various busted or soon-to-be busted rubber bushings and ball joints. Will replace ball joints with OEM or better and bushings with polyurethane where possible. -Shaking steering wheel at above 80kph -downshift from 5th to 4th is a bit crunchy unless I rev-match, might just try to renew the shifter assembly, but it's not a priority issue -tailshaft centre bearing could use a replacement, is it worth going 1-piece tailshaft as it doesn't look too fresh all around? Chassis: -underbody corrosion on many spots and in hollow spaces, needs to be treated -corrosion on many bolts, hoses, lines, suspension components, subframes, will be treated when replacing of the bushings is needed as time goes on -strut tower top panels and some of the surrounding panels are rusty, so needs fixing. Will look into doing this with a buddy in the winter, otherwise bite the bullet and pay a professional -driver side door is misaligned to the body and needs to go a slight bit more inwards -both door windows are misaligned and have an airgap where the window meets the door at the B pillar -The Aerocatch latches for the bonnet have locks but no keys, need new keys. -driver side door window is kind of gritty and could use a polish -damaged jacking rails and front frame rails, from people lifting the car the wrong way, might have this fixed by a bodyshop Electrical: -Nismo tachometer is just bouncing and displaying nonsense, supposedly worked fine when the stock ECU was still in the car -An old Greddy boost controller sits on the dash which will be removed as it servers no purpose anymore. -a led segment rpm gauge is on the steering column, will probably also be (re-)moved once the Nismo tacho is working correctly -there was an attempt to make the sound system better by the previous owner but it was just inducing noise all the time, ripped out the amp and filters in the back, no music for now -trunk antenna goes up as long as the radio is on regardless of the mode, I want it to only rise if I choose Radio specifically or per switch -3rd brake light is a bit dimmer than the taillights but everything was converted to LEDs so mabye now it just seems dimmer? -reverse light flickers, have to test if that behavior changes when I fiddle with the gear stick. Hope I can get around changing the switch. -Left side taillight, blinker section has minor water intake and is humid after washing. Other side has a hole in it, probably for that exact reason. I'll probably reseal them entirely and plug the holes. Engine: -minor coolant drips on one or the other hose -rear turbo leaks oil onto the exhaust making the car essentially undriveable due to fire hazard -Oil filter relocation kit has an oil drip at the Dash lines, will probably make a new connection there and tighten real good and pray -throttle body assembly is slightly stuck for the first throttle pedal input after sitting for a while I'm always open to suggestions and advice from more experienced people, I'm sure half of this list is easily dealt with and just requires some time and effort to sort out properly. Once I have some proper pictures of the car I will post some in this thread, I just have to remember to take some more once I get the chance to. Will post updates when I have news on anything, I want to try to keep this thread as kind of a logbook as well. Ultimately my goal for this car is to just enjoy it. An engine rebuild is probably going to happen sometime as well, because it is old after all. It will never be fully new again, I am just not that rich. But I want it to look good, work well and not rot away while I drive it. I'm probably gonna spend a lot of money on this journey, hopefully not an unreasonable amount.
×
×
  • Create New...