Jump to content
SAU Community

Recommended Posts

Yeah it has done quiet well. Especially the engines. some DA drivers are now using the LS1 and 2.

Although maybe one of the many reasons they are is because it will appeal to the Australian audience more

Yeah it has done quiet well. Especially the engines. some DA drivers are now using the LS1 and 2.

Although maybe one of the many reasons they are is because it will appeal to the Australian audience more

I guess what sometimes puts people off is not necessarily the car, but the hype that surrounds it. The Holden bandwagon, if you get what I mean.

Same goes for some people's opinion of Skylines.

Rotaries.

4 cylinders.

Etc.

Yeah it has done quiet well. Especially the engines. some DA drivers are now using the LS1 and 2.

Although maybe one of the many reasons they are is because it will appeal to the Australian audience more

One of the main reasons they remove RB's, 2JZ's etc is because LS1's are a lot lighter. Alloy block compared to a iron block.

Like the DLS R34 drift car, took out the RB25 Neo, chucked in the LS1, saved 50kg!!! Slapped some twin turbo's on it and you got a hell of a power to weight ratio over the stock engine setup.

lol right never seen one perform better in anything other than commo

Japanese cars with original Japanese motor always out perform the Japanese cars with ls1's etc fitted

kudas S13 with ls1 gets close but Im still not sold on it

Edited by 1400r

are you kidding have you seen it ?

power and torque do not make a drift car

speed,balance and driver skill do

ever seen a d1 ae86?

heres a link to a vid with D1 r34 with rb26 t04z watch it and try tell me that the GT Autosound car has the same balance at the moment

Edited by 1400r

what do you mean by 'balance' exactly? if you mean overall performance, the GT autosound car might need a few tweaks, but they are things that can be ironed out. an RB26 with a to4z would be nice but i cant see it being comparable to a TT LS1. more power, more toque, probly a more 'driveable' car on the track if that makes sense. not to mention the bonus of reliabilty.... :P

Edited by VB-

Once they ironed out the problems I'll compare again

until then LS1 being a better engine than those factory fitted is unproven regardless of extra power, reliability etc if it doesnt drift well what does it

matter if it makes more power than a rb or is more reliable

(Im including all rb's as basically being the same balance split wise front to rear although a 26 would weigh more than a 25 if it still had the standard twins)

by balance I mean the whole car working in unison not just a car that makes big power so must be sick yo

in a well balanced drift car the drivers can through the car in much harder and get back on the power much sooner than those with poor balance

skylines are well know for mid drift midcorner understeer Im yet to see how a Ls1 which "weighs less" than a rb has helped at all with this

you still see alittle in the Kakimoto 34 above and its been competing for awhile so all the bugs should be ironed out of it

from all that Ive seen of the Gt Autosound car(and Ive seen a fair bit) it's a corner exit smoke machine

1400R hits the nail on the head! The GT autosound car isnt a good set up atm as the driver doesnt have anywhere NEAR the skill required to use all of the power to its full potential.. all ive seen from that thing is straight line smoke ups and corner exits.. its lame. Then theres the reliability issues!! Its had a few issues thats for sure.

my RB has had none :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...