Jump to content
SAU Community

Recommended Posts

garrett turbo gt35r 62 ar

tiail 38mm westgate

plenum greddy and fuel line

n1 oil pump

forged pistons

eagle rods

acl coted bearings

split fire super direct

greddy timingbelt

tomei 252 cams

cometic theadgasket 1,5mm?

OS giken twinplate

N1 wather pump

650cc injectors

BIG ic

Big radiator

oil radiator

bigger fuel pump

Do I need to port the head?

Do I need tomei valve springs?

What more do I need.

What is going to brake first it is a drift/street car ;)

Edited by jansson
Link to comment
https://www.sau.com.au/forums/topic/190351-r34-neo-500whp/
Share on other sites

You will need HUGE brakes!

Nice setup. Good to see a few more big power gtts coming along.

Definitely do valve springs and why not port the head while you are at it?

All else sounds good but make sure you have very wide rear tyres ;)

Link to comment
https://www.sau.com.au/forums/topic/190351-r34-neo-500whp/#findComment-3427856
Share on other sites

I'm going to purch Big stoptec brakes and Nismo 1,5 way LSD

If I purch tomei valve springs how high rps can I go?

Okej I and a engine builder are going to take a good look on the head and se what to do=)

What is the weakest in the engine?

Anyting more I need to do bether?

Link to comment
https://www.sau.com.au/forums/topic/190351-r34-neo-500whp/#findComment-3430262
Share on other sites

I'm going to purch Big stoptec brakes and Nismo 1,5 way LSD

If I purch tomei valve springs how high rps can I go?

Okej I and a engine builder are going to take a good look on the head and se what to do=)

What is the weakest in the engine?

Anyting more I need to do bether?

Have not anybody something to share

Link to comment
https://www.sau.com.au/forums/topic/190351-r34-neo-500whp/#findComment-3432727
Share on other sites

Have not anybody something to share

if you are going to use it for drift i suggest u read sydney kids oil control thread and that turbo you are using is a bit laggy for drift unless u keep the comp ratio up and think about more cc's. i would also suggest a different plenum than the greddy one like a custom made one with longer runners!

u want it to rev so head work it a must also valves springs and everything done to head is a good start.

also i would use a tial 44mm-38 is too small and also 260 tomei cams that will help with midrange

thats the engine done now what about suspension and castor rods and all that shit ...r34 aint the best car for drift cheers its like taking my van to the drift track..hahahah

cheers

Edited by infected flow
Link to comment
https://www.sau.com.au/forums/topic/190351-r34-neo-500whp/#findComment-3432976
Share on other sites

  • 2 weeks later...
if you are going to use it for drift i suggest u read sydney kids oil control thread and that turbo you are using is a bit laggy for drift unless u keep the comp ratio up and think about more cc's. i would also suggest a different plenum than the greddy one like a custom made one with longer runners!

u want it to rev so head work it a must also valves springs and everything done to head is a good start.

also i would use a tial 44mm-38 is too small and also 260 tomei cams that will help with midrange

thats the engine done now what about suspension and castor rods and all that shit ...r34 aint the best car for drift cheers its like taking my van to the drift track..hahahah

cheers

I have hks hyper max 3 coilovers cusco castor rods ray wheel etc etc

Are you sure the 44mm westgate is the right choise I do not think so.

Why longer runners?

Yes tomei 260 cams but whats springs are the best choise?

Link to comment
https://www.sau.com.au/forums/topic/190351-r34-neo-500whp/#findComment-3454901
Share on other sites

  • 1 month later...
I put all my $$$ onto the diff being the first thing to let go :D

Also your more than likely going to get valve float given you'll be running a reasonbly high amount of boost, and using big RPM to do so.

the half shafts will snap before the diff thats for sure. it seems that with anything 300 rwkw and over your walking a fine line with the stock sized halfshafts.

swap in GTR items along with a decent LSD

Link to comment
https://www.sau.com.au/forums/topic/190351-r34-neo-500whp/#findComment-3551995
Share on other sites

the half shafts will snap before the diff thats for sure. it seems that with anything 300 rwkw and over your walking a fine line with the stock sized halfshafts.

swap in GTR items along with a decent LSD

The gtr ones, are they a straight fit in, or are they fairly easy to put in?

Link to comment
https://www.sau.com.au/forums/topic/190351-r34-neo-500whp/#findComment-3553038
Share on other sites

500whp (370ish rwkw) with a 62 rear is a pipe dream but very Nice streeter setup none the less. and the 38m gate is to small for anything over 400whp really.

R34 with the right setup is sweet for drift, a little big but stable as and far less work than a 32 or s13 chassis.

Link to comment
https://www.sau.com.au/forums/topic/190351-r34-neo-500whp/#findComment-3553094
Share on other sites

quite a interesting thread as ive just put my car in for a simliar setup, as stated above i dont think a .62 housing will meet 500rwhp.

im going to be running a 3.0L setup for the extra torque, so wat do u guys recommend diff wise for mainly street use. occasional drag.

also jason did u modify a gtr greddy plenum to fit the neo? i dont believe there are any bolt on greedy plenums

Link to comment
https://www.sau.com.au/forums/topic/190351-r34-neo-500whp/#findComment-3553114
Share on other sites

quite a interesting thread as ive just put my car in for a simliar setup, as stated above i dont think a .62 housing will meet 500rwhp.

im going to be running a 3.0L setup for the extra torque, so wat do u guys recommend diff wise for mainly street use. occasional drag.

also jason did u modify a gtr greddy plenum to fit the neo? i dont believe there are any bolt on greedy plenums

as for power i reckon closer to 400whp.

std diff will be fine (just shim it or put a centre in it)... alot of hype up there for nothing..... we broke one diff in 3 years. i will post you a link for the plenum, i have done a few just use the R33 one it bolts straight up just a few small things need changing accessory wise. piece of piss.

http://www.skylinesaustralia.com/forums/In...4+plenum+greddy

Link to comment
https://www.sau.com.au/forums/topic/190351-r34-neo-500whp/#findComment-3553119
Share on other sites

std diff will be fine (just shim it or put a centre in it)... alot of hype up there for nothing..... we broke one diff in 3 years. i will post you a link for the plenum, i have done a few just use the R33 one it bolts straight up just a few small things need changing accessory wise. piece of piss. as for power i reckon closer to 400whp.

http://www.skylinesaustralia.com/forums/In...4+plenum+greddy

greddy plenums only support aroun 400whp???? i thought it be alot higher, plazmamans plenums (direct bold for neo) support 1000+ i believe, although the price is that high aswell lol

Link to comment
https://www.sau.com.au/forums/topic/190351-r34-neo-500whp/#findComment-3553129
Share on other sites

greddy plenums only support aroun 400whp???? i thought it be alot higher, plazmamans plenums (direct bold for neo) support 1000+ i believe, although the price is that high aswell lol

no i reckon a GT35R .6 will support around 400rwhp.... the plenums are good for at least double that.

Link to comment
https://www.sau.com.au/forums/topic/190351-r34-neo-500whp/#findComment-3553173
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...