Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

:turned: yay no damage under the car :w00t:

as for the hicas its going in the bin and a lock bar is going in it's place thanks sambo33 sounds like a plane

no worries, i got mine from greenline, but it looks like theres some for sale on the forums too

http://www.skylinesaustralia.com/forums/t183517.html

thanks hun im about to put it on a hoist just to make sure that nothing else is damaged and ill get my mate to look at that, i was going around a bend to the left and it just went out from under me so i went to power out of it but that was the bad move i think cause that is what threw me towards the gutter what do you think i should have done?
Look, I wasn't there, but it sounds to me like you simply went round the corner too quick and lost it.

HICAS only moves +/-0.5 degrees, and as said just leaves you a bit of a "vague" feeling on the edge.

It's not VTEC yo! and doesn't go about randomly and violently kicking in under normal operation.

Sorry to hear about ur car Kellie... cable ties & gaffa tape ftw !!

my hicas is a bit knackered, just like with Cubes under hard acceleration it can apply itself, making me have to counter steer slightly to the left... and it returns under deceleration, pretty sure the rack or the rear pump is fkd. Just gotta find time to rip out all the unwanted pump and lines when i chuck in my lock bar and lose that extra 30kg :P the guides say it takes a few hours.... so im gonna allow days :rolleyes:

So let me see if i got this right, You own a R33 Turbo RB25 RWD car, You were traveling around a corner, and ur car went sideways, and gave it more stick, and u lost it into a gutter, and ur blaming hicas...

Edited by silverbulletR33

I was in a 32 awhile ago, we were driving in a straight line, I was in the back and I felt a sudden side shift, at the same time i asked Wtfwt the driver said the hicas light has come on, it has happened a few very random times before.

I ditched mine as well :)

i had a 33 gtst and another mates one too, that over 80k's the hicas went crazy. Id be correcting myslf on a straight road.

Turned out to be the little plastic disc behind the steering wheel was crooked.

So hicas does stuff up, you cant assume that a girl (kellie) does not know how to drive, and just put it down to that.

I say good on her, being out there cruising learning her car, its the only way to learn is to know your limits.

Some ppl are bagging her and i bet she could drive better than some ppl on here, at least she is out there doing it.

Thats my 2 cents

mike

I've never had an issue with my HICAS so I don't really know what it's like when it goes wild but to say that the rear wheels turning half a degree has caused you to crash is ridiculous.

No offense (well... not much anyway)

Race__24....toolmaker? fitter and turner?

hey i love that design...if it was cnc do you still have the program??? hehe.

Yeah mate, toolie by trade but working in aerospace now. I don't have the program but can write you one if you want.

i got mine off of Sherwin (NV_NO1), hes quick and is a good seller.

ive got a 180, so mine is a bit different, but im sure the symptoms of malfunctioning hicas would be similar.

before i locked my hicas it actually seemed to have a mind of its own. at low speed, as others have said, it was alright, i could still notice it, but could handle it. it wasnt until i started going 100km/h+ that it really got bad.

it was actually dangerous. the back end just felt like it had a mind of its own. slight corners would make it go nuts and all over the place, and have fun trying to turn abit sharper under speed. there was no way of knowing what it would do.

r33s have it easy when it comes to locking it, as others have mentioned it is electrical.

on s13s it is mechanical. took me a couple of hours to get the tie rod ends out, lock bar in, remove all the lines to the front, remove the actual hicas pump, and then finally run a loop from the outlet that goes to the hicas cradle to the inlet that brings it back.

then there was the hunt to find the right wire to cut to get the light to go out on the dash.

worth it though, the before and after difference is really very good. but thats coming from hicas that had a mind of its own. if it was working correctly im sure it would have served its purpose properly.

not sure bout 33's but i gots 32 that had hicas but got taken out n an S13 rear cradle got put in.

bolts straight up n is shyt load lighter,

i would recomend that to ppl if they want hicas gone in there 32 for good

Possibly a weakness with the hicas elec setup.

Mines only recently started playing up but granted I have had the car for ~6years and travelled ~181,000km's (total odo 248,000) so she's done well.

The cars still a million times better than the old VS 5ltr 5speed I bought that was near new back in 1999 with low km's. From day one the interior rattled, had alternator, inlet manifold leaks, gearbox, diff and rear IRS subframe problems. The little ol' R32 has zero rattles, still drives well, still on the same alt, power steer pump etc.

thanks to those that slaged me yeah i was going fast but you all were not on the cruise and i didnt ask for you all to be nasty so thanks :P

love all of you that were helpful and gave me some tips on how to fix/evaluate the problem :P

thanks michael for sticking up for me :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...