Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

:turned: yay no damage under the car :w00t:

as for the hicas its going in the bin and a lock bar is going in it's place thanks sambo33 sounds like a plane

no worries, i got mine from greenline, but it looks like theres some for sale on the forums too

http://www.skylinesaustralia.com/forums/t183517.html

thanks hun im about to put it on a hoist just to make sure that nothing else is damaged and ill get my mate to look at that, i was going around a bend to the left and it just went out from under me so i went to power out of it but that was the bad move i think cause that is what threw me towards the gutter what do you think i should have done?
Look, I wasn't there, but it sounds to me like you simply went round the corner too quick and lost it.

HICAS only moves +/-0.5 degrees, and as said just leaves you a bit of a "vague" feeling on the edge.

It's not VTEC yo! and doesn't go about randomly and violently kicking in under normal operation.

Sorry to hear about ur car Kellie... cable ties & gaffa tape ftw !!

my hicas is a bit knackered, just like with Cubes under hard acceleration it can apply itself, making me have to counter steer slightly to the left... and it returns under deceleration, pretty sure the rack or the rear pump is fkd. Just gotta find time to rip out all the unwanted pump and lines when i chuck in my lock bar and lose that extra 30kg :P the guides say it takes a few hours.... so im gonna allow days :rolleyes:

So let me see if i got this right, You own a R33 Turbo RB25 RWD car, You were traveling around a corner, and ur car went sideways, and gave it more stick, and u lost it into a gutter, and ur blaming hicas...

Edited by silverbulletR33

I was in a 32 awhile ago, we were driving in a straight line, I was in the back and I felt a sudden side shift, at the same time i asked Wtfwt the driver said the hicas light has come on, it has happened a few very random times before.

I ditched mine as well :)

i had a 33 gtst and another mates one too, that over 80k's the hicas went crazy. Id be correcting myslf on a straight road.

Turned out to be the little plastic disc behind the steering wheel was crooked.

So hicas does stuff up, you cant assume that a girl (kellie) does not know how to drive, and just put it down to that.

I say good on her, being out there cruising learning her car, its the only way to learn is to know your limits.

Some ppl are bagging her and i bet she could drive better than some ppl on here, at least she is out there doing it.

Thats my 2 cents

mike

I've never had an issue with my HICAS so I don't really know what it's like when it goes wild but to say that the rear wheels turning half a degree has caused you to crash is ridiculous.

No offense (well... not much anyway)

Race__24....toolmaker? fitter and turner?

hey i love that design...if it was cnc do you still have the program??? hehe.

Yeah mate, toolie by trade but working in aerospace now. I don't have the program but can write you one if you want.

i got mine off of Sherwin (NV_NO1), hes quick and is a good seller.

ive got a 180, so mine is a bit different, but im sure the symptoms of malfunctioning hicas would be similar.

before i locked my hicas it actually seemed to have a mind of its own. at low speed, as others have said, it was alright, i could still notice it, but could handle it. it wasnt until i started going 100km/h+ that it really got bad.

it was actually dangerous. the back end just felt like it had a mind of its own. slight corners would make it go nuts and all over the place, and have fun trying to turn abit sharper under speed. there was no way of knowing what it would do.

r33s have it easy when it comes to locking it, as others have mentioned it is electrical.

on s13s it is mechanical. took me a couple of hours to get the tie rod ends out, lock bar in, remove all the lines to the front, remove the actual hicas pump, and then finally run a loop from the outlet that goes to the hicas cradle to the inlet that brings it back.

then there was the hunt to find the right wire to cut to get the light to go out on the dash.

worth it though, the before and after difference is really very good. but thats coming from hicas that had a mind of its own. if it was working correctly im sure it would have served its purpose properly.

not sure bout 33's but i gots 32 that had hicas but got taken out n an S13 rear cradle got put in.

bolts straight up n is shyt load lighter,

i would recomend that to ppl if they want hicas gone in there 32 for good

Possibly a weakness with the hicas elec setup.

Mines only recently started playing up but granted I have had the car for ~6years and travelled ~181,000km's (total odo 248,000) so she's done well.

The cars still a million times better than the old VS 5ltr 5speed I bought that was near new back in 1999 with low km's. From day one the interior rattled, had alternator, inlet manifold leaks, gearbox, diff and rear IRS subframe problems. The little ol' R32 has zero rattles, still drives well, still on the same alt, power steer pump etc.

thanks to those that slaged me yeah i was going fast but you all were not on the cruise and i didnt ask for you all to be nasty so thanks :P

love all of you that were helpful and gave me some tips on how to fix/evaluate the problem :P

thanks michael for sticking up for me :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...