Jump to content
SAU Community

Recommended Posts

i am thinking of moving to campbelltown from the uk within the next three years can anyone tell me if this a good place to live for me and the wife (no kids) and is there a good garage to look after my 32 gtr near by any info or advice would be great .

thanks shane.

no no and no!! lol

i personally think its a shit areaa!!! and all the suburbs surrounding it too...

heard of plenty of thefts there..

Why did you choose campbelltown?

you gonna be buying a place?

Edited by siddr20

Depends on where in campbelltown.

I live in Leumeah and wouldnt live anywhere else.

Never had any problems,Public school and Highschool 5 min walk either direction.Close to train station.

Reasonally priced property.

campbelltown is a shithole, there are plenty of better places to live that are closer to the city..

if you like 17yo mothers and dole bludgers than campbelltown is your spot :(

heh, you should probably visit before making sweeping statements. The area is huge with the majority of the population being young families. A large proportion of residential development in sydney in the last 20 years has been out here.

Nothing wrong with it, property is very well priced lots of new housing around the place rather than 40 year old houses/blocks of units in the inner suburbs.

Close to oran park, though in 3 years that will have likely been closed and developed, easy drive to wakefield park.

Travel to the city is a bitch if you drive as the M5 is backed up from about 6am, trains are accessable though.

I just bought a 7 year old house on an 880m2 block for under 400k. You can't do that anywhere else in sydney.

**** THE MOST CONFUSING DAY IN CAMBELLTOWN IS FATHERS DAY****

Yeh Oran park is the only bonus but is only going to be around for another few years if that! It gets really hot out there and takes years to get too the city and the people i guess are the same as anywhere you have your bad areas and good areas I know of a bad area their actullay it is just a house LOL WANKER! Sorry back to the subject

Advice.... locate employment find out how much you want to spend on rent and go from there. We will be happy to help

Ive lived near ctown nearly all of my life. And have never had a problem. U will find it if you want it though.. Public transport is easily accessable and to drive anywhere is relitvly quick. It is kind of like central for access to sydney city, wollongong and the blue mountains.

alot of areas in sydney have dole bludgers n teeny bopper's popping babies out....not just campbelltown.....there are better places to live in sydney eg bondi...but not everyone was brought up with a silverspoon. good n bad in every suburb so making generalisations cause of certain areas that are bad doesnt make it ALL bad.

Altho it does share its numbers of smakies around tho, but since the gov likes to give our hard earned money away in taxes so easierly.....makes you want to go on the dole!:P

Campbelltown isnt that bad just the all the bludgers etc come from other suburbs to live

haha

Seriously it isnt that bad a place to live..surrounding areas like camden, harrington park denham court, st andrews etc is probably nicer place to live

ive been in glenfield and mac fields for more than 20 years and its the only place i feel comfortable in. i dont know anyone on the dole, i dont get mugged every day and i catch a train to the city in 35min. why would you live anywhere else? especially if you own a skyline, you need somewhere with access to roads that are actually fun to drive, unless your a poser who is an inch of the ground cruising for chicks.

I have lived on both sides of sydney and find them relatively the same :)

Depends how close you want to be to the city and if you like open space??

Campbelltown is nice, im in the good part and its relatively modern..all new housing estates are going up and its cheaper liveing out here and the M5 is pretty good most days just gets a bit backed up if there is an accident :O

Campbelltown is misunderstood, everywhere there is good and bad!!

It all depends on the lifestyle you are use too..

Let us know if and when you plan on moving will come and say hi :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...