Jump to content
SAU Community

Recommended Posts

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

LPG on a turbo car would be strange.

I wonder how you would tune it

lol @ LPG. Dude do you even know what you're talking about?

it has been done before. and in the case i read allowed for much higher boost levels

One option i have concidered it to do an LPG conversion and then you can have the power and economy. LPG loves high compression and so you vould really boosts it.

Yes you would have to really boost it.....to try and get the power back that 98RON gives you.

If your gonna get gas, get N20.

Edited by KeyMaker
I call lies on this one.

especially the GTiR with a bit done to it.

My S14 had 175rwkw with the usual mods of exhaust, intake, boost and FMIC.

an R33 with the same power can't keep up with them.

GTiR specs:

curb weight - 1220kg

accelleration 0-100kmph - 5.9 seconds

accelleration 0-400m - 13.9 seconds

max power output - 227hp @ 6400rpm (or 171.5 kw)

max torque - approx. 290 nm

R33 GTST specs:

Curb Weight - 1390 Kg

Max. Power; kW/HP 187/250 @ 6400 rpm

Max. Torque 294NM @ 4800 rpm

accelleration 0-100kmph - 6.96 seconds

accelleration 0-400m - 14.30 s

so.. you had stock boost, exhaust and fmic..

he had "a bit of work"

how do you figure you beat a car lighter by 170kg and only making 16kw and 4NM less in standard trim.

same mods done to a GTiR would would tear you a new a-hole.

only way youd win is on a roll from like 120kms onwards..

not that this has anything to do with this thread.

as for this thread.

S14 is better than R32 (with RB20det) on power and fuel.

Looks - R32 GTST is a better looking car than an S14 series 1.

interior on the S14 is better than an R32 GTST

S14 series 2 is better than R32 GTST in any comparison.

Formula goes like this.

R33 S2 > S14A > S14 > R32 > R33 S1

here are my ones..

Stolen S14 with no insurance for the lose

92 R32 GTST

GTiR with 180kwatw would keep up with my 200kw GTR. lol easy..

so a 135kw atw std power iR would own a GTST.. easy..

S14a over all skyline part from R34 or BNR32

it has been done before. and in the case i read allowed for much higher boost levels

The biggest problem with LPG is the agricultural delivery mechanism is quite restrictive as they were designed for low tech low performance engines and haven't had much development since the carby days.

I read an article recently about a new LPG system that didn't restrict airflow as much and they got very good results on an XR6 turbo.

LPG does have a very high octane rating hence the ability to run high compression and high boost - you can usually only realise this benefit by having an LPG only system, although the XR6 turbo mentioned above was dual fuel.

The cost of the decent LPG conversion was pretty expensive though (somewhere between $5K-$10K I think) - it would take a long time to recoup the costs, and is a big % of the cost of the total car.

The old style dual fuel LPG systems would never keep up with a 98RON powered car.

cheers

Mike

I get my R33 down to 10.2L/100km when driving like a granny (don't rev over 3K or hit boost)

Most of the SR20DET's are roughly about the same too, give or take a half a litre.

It sort of defeats the purpose of such engines keeping them off some sort of boost all the time and you may as well just buy a Commodore, Camry or equivalent in vehicular whitegoods and a bowls hat for the rear parcel shelf.

lol

find my old GTiR and run that lol.

i pwned my mates 250kw 265R18 wheeled ECR33 off the line and held him off.. lol. why traction no weight and SR powah. R33 are slow std.

sure, It will loose.

Cool.

thanks for your input.

No Problem. :w00t:

Hey man.. you can't come in here and quote real life experiences.

especially if it's against skylines.

you're going to ruin peoples dreams.

No way a Pulsar hatch can beat a skyline.

Skylines are sports car's y0!

Your so Cool.

I didnt want to bother bringing it up but ok.

stock vs stock, Sure GTiR will win. But only by 0.04 on Q/M. ET.

Few simple Breathing mods. on both cars. The RB25 gets more power per mod than the GTiR. for Example ie. Zaust, Pod, FMIC.

For Example.

GTiR, FMIC, Custom 3" pipework and Blitz BOV, Power FC, Pod, CAI, Exhaust, = 165-175awkw (give or take) @ 16psi Weighting in about 1250kgs. This one on question had 165awkw. possibly low reading dyno?

R33 Gtst, Zaust, Pod, Cai, FMIC, everything else stock. = 180rwkw > 195rwkw (some examples have gotten more just a rought example) Mine actually turned out 194rwkw. @ 11psi Weighing in about 1360kgs.

GTiR -> floggs the GTST off the line, every time, By about 80km's, GTST Passes the GTiR, to win to 160 by about 4 car lengths. Every time.

Tests were done on Private closed controlled Conditions of course :). You seem to believe they are faster than they actually are.

Edited by silverbulletR33

Oh yea, and the GTiR had Lightweight Volk Wheels too.

Dont get me wrong, I love the little GTiR, I have had the pleasure of driving the one mentioned above, and even got to race it a few times, do a few launches. Great little cars And they launch Insanely hard. Around a track though, Im pretty sure the GTiR would've killed me :w00t:

i'd take an S14a over any R32 or R33 gtst

although i believe an R32 can look nice with a GTR front, i love hte look of hte S14a any day

the R33 is the (very) ugly duckling of the skyline family, i would stay away

the only issue with the S14 is that interior-wise its fairly plain, unlike the skylines

my 2c? well my 2c if really only worth 1c but i'll give it anyway..

...get an S14a

you can get just as much power from lpg if you tune it right.

you need more timing advance and computer can take car of that and with the right installation you have a sub computer to control the lpg flowrate.

as i said before lpg loves high compression (19:1) so it would work really well with hight boost.

Also they can do lpg multi point injection now & it costs $4000

Edited by megabuff

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...