Jump to content
SAU Community

Recommended Posts

Hey guys,

Ive Got for sale a 1993 R32 GTR V Spec . Price is $30,000 OO MAKE AN OFFER. Reason for sale is he is on the market for a r34 GTR, if the car is not sold it will stay in the garage . You may Have seen it at the latest Wollongong Cruise Plates Were FLYT-32 .

Car was bought from Japan 1993 Geunine V Spec . It was a Endless Racing Car i have turned it into a street car. It had a Rebuild Done 5,000Kms Ago With a Brand New R34 gtr Motor , HKS Forged Pistons , Unsure about head work But i have been told by the owner that there is N1 Engine Bits (For the power it makes im very sure head work has been done ),ACL Race Series Metal Head Gasket Kit, Tomei Sump Baffle ,Turbos are R34 Geuine N1 Turbos, Power FC D Jetro , Nismo Fuel Pump , Sard 720 cc Injectors, Plasma Plenum , ARC intercooler, Veilside Dash 340Kms , Veilside Built Gearbox , Triple Plate Clutch ,HKS EVC5 Boost Controller ,Brembo Brakes ( V SPEC ), Half Roll Cage ( I HAVE THE FULL ROLL Cage ) , Veilside Marriot 17inch Rims With Big dish And Dunlop Wide Tyres ,Veilside Front Lip, X-FORCE After Market Dump Pipe , X-FORCE After market Front Pipe , Full race Exsaust , Recaro Racing Seat ( RED ) , Car is fully Engineered ( HAVE RECEIPTS ) , The list OF Mods go On and On and On ... I Have spent Over 20K On This Car since i got it to Sydney .. No short Cuts , No backyard Workmanship ,

Car Makes 320rwks On Safe Tune 20psi

And 350rwkws on 25psi

( This was on a hot Day Im sure the car is capable of more )

Car Is tuned For response and Torque , Car is used for street Has NEVER seen the track . Previous Owner in Japan has run a 10.8 1/4 Mile

Car Is Taken Care of Reputable Workshops Such as CRD And Bel Garage.

Car is Ran Daily on 15Psi , Highest Boost i have run on it was 22psi. But even at 18psi is very very Quick, I havent really pushed it to its limits ... Car is barely Driven Mostly on Weekends ....

Thats all i can think of now any more questions feel free to ask

Thanx guys .. I Have uploaded Picx thanx To John , So many mods Perfect Street Car I dont know what else can be done to this absoulote machine of a car...

NEW PICS BELOW !!!!!!!

8gfiu76.jpg71dm5br.jpg

80y693k.jpg879xfe8.jpg

6sgzexe.jpg6qa5gd3.jpg

post-245-1194007852_thumb.jpg post-245-1194007862_thumb.jpg

post-245-1194007909_thumb.jpg post-245-1194007919_thumb.jpg

post-245-1194007893_thumb.jpg post-245-1194007882_thumb.jpg

Edited by MRGTR911
  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

mate saw this car at croydon when i was getting my car tuned. without a doubt the best example of a 32gtr i have seen. thing sounded awesome on the dyno. wish i had the money to buy it :). not interested in a r33 gtst plus cash adjustments is he? hahaha all the best with the sale mate

guys i have seen this machine parked near AAA tyres once, what can i say its an animal! Goodluck, but you will probably have to post some pics to entice people with the asking price..

mate saw this car at croydon when i was getting my car tuned. without a doubt the best example of a 32gtr i have seen. thing sounded awesome on the dyno. wish i had the money to buy it :) . not interested in a r33 gtst plus cash adjustments is he? hahaha all the best with the sale mate

He is looking for a swap for a r34 GTR or a original walkinshaw. if it doesnt sell he will keep it..

guys i have seen this machine parked near AAA tyres once, what can i say its an animal! Goodluck, but you will probably have to post some pics to entice people with the asking price..

Thanx Buddy sorry dont want to brag too much about the car if there is interested parties i will give them further details and they will see for themseleves...

Umm can u give me an idea about mods, since you say to many mods to list im assuming at least a full forged rebuild turbos and at least 350rwkw+ can u list more details.

Umm can u give me an idea about mods, since you say to many mods to list im assuming at least a full forged rebuild turbos and at least 350rwkw+ can u list more details.

Car was bought from Japan 1993 Geunine V Spec . It was a Endless Racing Car i have turned it into a street car

It has a r34 gtr Engine With HKS Forged Pistons , Unsure about head work But i have been told by the owner that there is N1 Bits,Turbos are R34 N1 Turbos, Power FC D Jetro , Nismo Fuel Pump , Sard 720 cc Injectors, Massive Plenum , ARC intercooler, Veilside Dash 340Kms , Built Gearbox , Triple Plate Clutch ,HKS EVC5 Boost Controller Brembo Brakes, I cant think of anything else at this stage but im sure ive missed something So i think This should give you an Idea .

Car Makes 320rwks On Safe Tune 20psi

And 350rwkws on 25psi

( This was on a hot Day Im sure the car is capable of more )

Car is Ran Daily on 15Psi , Highest Boost i have run on it was 22psi. But even at 18psi is very very Quick, Car has been tuned for street , High torque ,

Thats all i can think of now any more questions feel free to ask

Car was bought from Japan 1993 Geunine V Spec . It was a Endless Racing Car i have turned it into a street car

It has a r34 gtr Engine With HKS Forged Pistons , Unsure about head work But i have been told by the owner that there is N1 Bits,Turbos are R34 N1 Turbos, Power FC D Jetro , Nismo Fuel Pump , Sard 720 cc Injectors, Massive Plenum , ARC intercooler, Veilside Dash 340Kms , Built Gearbox , Triple Plate Clutch ,HKS EVC5 Boost Controller Brembo Brakes, I cant think of anything else at this stage but im sure ive missed something So i think This should give you an Idea .

Car Makes 320rwks On Safe Tune 20psi

And 350rwkws on 25psi

( This was on a hot Day Im sure the car is capable of more )

Car is Ran Daily on 15Psi , Highest Boost i have run on it was 22psi. But even at 18psi is very very Quick, Car has been tuned for street , High torque ,

Thats all i can think of now any more questions feel free to ask

Endless Group A race car or Super Taikyu car?

Endless Race Car ,

Just a note i have turned the car into a street car here had to make alot of changes ....

Guys i have seen this car in real life and WOW!!!! One fine example of a R32-GTR. It has an extremely clean and detailed engine bay. Wish you all the best with this sale.

Thanx Wasim If i can sell this your car is all mine .. If its not sold within amonth its staying in the garage and the search starts for My r34 GTR Hopefully if you still got yours we will talk...Once again if you want to trade ill give you my car and My Hot blonde X Girlfriend i think thats a fair trade lol.....

see you on the weekend...

Guys i have not mentioned everything on this car too much to list, You have to see it to believe All PM'S Replied to so far .

The whole of the engine bay is pretty much brand new....

if anyone has r34 GTR For a good price i will trade

Edited by MRGTR911

Thanx for That John , All other PMS Replied ..... Just a note in pic number 11 the Cage Is oin the front seat i have taken it out and made a half cage at the back but i still have the Full cage ...

What are the size of the rims and tyres?

Any suspension work done to it?

Are you in Sydney?

Thanks!

Yes i am In Sydney

Suspension = HKS Adjustable Coilovers

Rims - 17inch

Tyres Front - Dunlop 245 45Z R17

Back - Dunlop 245 45Z R17 ( STRECHED )

BUMP !! Cumon Guys absolute Machine Here , If your looking to make the V8's , 33's and 34's Burn this is your car ....

Edited by MRGTR911
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...