Jump to content
SAU Community

R34 Gtr V Spec Shell

GT51R
 Share

Recommended Posts

GT51R Experienced

GT51R

Posted
Posted (edited)

Hi please see the ebay website, should you bid, please bid appropriately, it is a binding contractural agreement.

The car was bought previously and has been off the road for a while as i havent had any time to follow through with finishing the project off. It comes with the rear interior, roof lining, boot trim and tool kit. Wheels, subframes, doors, boot, wing, front seats, rear bumper, tail lights, side skirts are not included.

CAR IS SOLD AS A BARE SHELL

I am getting married and do not have the time to finish building the car up, i intended on building a circuit car out of it, but time has run out for me to finish the project. The vehicle had sustained prior damage in Japan, was fixed here in Australia, car needs a clean up. I repeat car has been previously damaged. Sold as parts not a car. Can be reregistered or used for race/rally purposes. Car is currently still registered and insured, also complied. I have compliance plates and registration to go with it also.

The shell comes with boot interior, tool kit, rear seats, rear plastic interior panelling, floor carpet, roof lining, fuel filler, fuel tank, rear window glass and quarter glass.

There are no doors, bonnet, fenders, subframes, suspension, wheels, front seats, boot, wing, side skirts, rear bar, dash, motor, gearbox, diffs, headlights or tail lights.

Please dont ask me questions as to whether parts are for sale as they are not.

Recently sold for $15,000AUD on ebay bidder never paid and furthermore is from this website. I would be seeking something close to this figure... It is registered and complied. Needs work to front end as it was hit in Japan and repair job looks rushed.

If you wish to bid the shell is on ebay, please bid appropriately.

You can pm me.

Cheers.

5xsbd08.jpg

6f7uo0j.jpg

4qf1dl0.jpg

5xnn639.jpg

5z71hu0.jpg

6bypobb.jpg

66e94sz.jpg

54iqma1.jpg

4ih6dza.jpg

Edited by GT51R
Link to comment
https://www.sau.com.au/forums/topic/191425-r34-gtr-v-spec-shell/
Share on other sites
kudos.motorsports Grand Master

kudos.motorsports

Posted
Posted

To anyone interested in this vehicle, I currently have a complete (panel) GTR front end sitting in Japan.

071028_BNR34_Front.jpg

PM for details, best of luck with the sale.

Beer Baron Grand Master

Beer Baron

Posted
Posted

no links to other auctions or other forums please mate. if you want to sell something here, describe what it is, where it is, and why it's for sale, and post a price. I'll give you a little while to ammend the ad. thanks. R

Owgasm Grand Master

Owgasm

Posted
Posted

Bidder #7 is a joker.

Hes brand new to ebay and screwing around.

GT51R, tip for next time you relist it.

Put buyer requirements up.

Phone verification for all bidders with a feedback of 3 or less.

etc etc.

I also got an offer near Kailen's.

666DAN Grand Master

666DAN

Posted
Posted

Yeah someone is playing sill buggers for sure, no point spending that much on a "GTR" (said figuratively speaking as there isn't much left to make it one) when you could buy an R34 GTFour and throw in the GTR running gear and still be better off than chasing up the billion pieces required to make this what it once was and may never be again.

GT51R Experienced

GT51R

Posted
  • Author
Posted

Well if the bidder is a joker than he's an idiot as i have is address, my godfather is a business lawyer so if i dont get paid this time i am gonna summons the idiot, as i can sue based on the contractural agreement terms based on ebays signing up policy... I am not messing around this time, i want the money for my wedding. If another dickless piece of shit bids on it for fun then this time he/she will learn the meaning of financial pain. I wont let go this time... I gave full warning in my declaration of bidding on the item, hence i gave my duty of care...

GT51R Experienced

GT51R

Posted
  • Author
Posted
Yeah someone is playing sill buggers for sure, no point spending that much on a "GTR" (said figuratively speaking as there isn't much left to make it one) when you could buy an R34 GTFour and throw in the GTR running gear and still be better off than chasing up the billion pieces required to make this what it once was and may never be again.

A gtfour resale or build up is not of the same value as that of a GTR which is already complied and registered... THe money you can make off it by rebuilding it up is in excess of $25,000 atleast. The car when put back together would cost only $14k or so and then you can sell it for $60k minimum!!! Cant do that with a GTfour, its suits a person who is a car bodybuilder and seller... Otherwise people cant see the usage for it...

GT51R Experienced

GT51R

Posted
  • Author
Posted
Bidder #7 is a joker.

Hes brand new to ebay and screwing around.

GT51R, tip for next time you relist it.

Put buyer requirements up.

Phone verification for all bidders with a feedback of 3 or less.

etc etc.

I also got an offer near Kailen's.

The last dumbass who won it at $13,099 was a genuine person and had feedback higher than 3 etc... The person was about to transact until they couldnt get all the money...

Owgasm Grand Master

Owgasm

Posted
Posted

Yeah, i understand.

Though you know those that a frauds on ebay don't use thir true name, address or any other contact information.

So Good luck finding him.

When your building a car though you don't think of selling it before you even start.

Ah well. Hope bidder #7 is good for you.

666DAN Grand Master

666DAN

Posted
Posted
A gtfour resale or build up is not of the same value as that of a GTR which is already complied and registered... THe money you can make off it by rebuilding it up is in excess of $25,000 atleast. The car when put back together would cost only $14k or so and then you can sell it for $60k minimum!!! Cant do that with a GTfour, its suits a person who is a car bodybuilder and seller... Otherwise people cant see the usage for it...

That car shell is missing so many pieces the profit margin would be slim at best, the pictures still show it with a million more pieces than it has. If you want to make a quick $25K there are better/easier ways. The only thing GTR about it is the VIN number. It would be that much of a bastard to rebuild you'd need literally another complete GTR to scab bits off, only good if you've picked up something in Japan that can't be complied and you bring it over as the donor car.....even then I can imagine Mr Angle grinder would come out and the chassis numbers would mysteriously swap....presto complied

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
×
×
  • Create New...