Jump to content
SAU Community

Recommended Posts

Hey crew,

Just blew the turbo on my car, its the old hpi r32 4door drift car. Most of you would know the car?

It was running a kkr 480, what would be a good upgrade similar to this size turbo? it was running 250kw at the moment on 20psi... rb24 stroker motor. Also wondering if I will have to open up the motor or not as I poured alot of metal out of the cooler and pipes!

Any ideas would be great!

Thanks Joey.

post-25157-1193726152_thumb.jpg

post-25157-1193726391_thumb.jpg

post-25157-1193726566_thumb.jpg

post-25157-1193726764_thumb.jpg

post-25157-1193789053_thumb.jpg

post-25157-1193789107_thumb.jpg

post-25157-1193789133_thumb.jpg

post-25157-1193789155_thumb.jpg

Edited by white32
  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Personally i would be sending the turbo back to KKR and askign how do you explain such a catastrophic turbo failure. I personally woudl carefully rip off the inlet pipe to the throttle body and see if there is any debris in that pipe, up to /around the throttle body..

The intercooler woudl tend to be a reasonably good filter for crap boing through, but fine particles woudl still most likely get through. Perhaps pull the plugs and crank it over for a bit to clear it????

Best consult a trusted mechanic me says... :D

thats rather horrible... i would consider buying another cooler also since its going to be too hard to get all the shards out your current one.

Consider a garret GT3071R IW T3 housing and you'll crank big numbers with better responce

seems to be a few KKR's dropping off....GEN TT just stopped using them also, i hope they can sort out the issues for all the tight asses out there :P im sure it is just one of those things, im pretty sure the oil control issue is sorted now. ive not heard of another failure like this though.

slap on a 3071 or a td06sh-25g

Wow, that is a serious failure right there! Were you doing anything out of the ordinary?

Just floored it in 2nd gear bounched the Bee-R rev limiter once then ka boom!

nO FUN...

Thanks for the replies guys. Will go to local mechanic some time today, on foot god dammit...

Just floored it in 2nd gear bounched the Bee-R rev limiter once then ka boom!

nO FUN...

Thanks for the replies guys. Will go to local mechanic some time today, on foot god dammit...

That explains it... cheap turbo and crazy shaft forces caused by BEE-R rev limiter.......

that doesnt look good!

im running kkr480 turbo aswell, run around about 1.3bar or 19psi daily thru it, but ive noticed mines water cooled and oil cooled..why is all the kkrs ive seen are only oil cooled? hmmmm

that doesnt look good!

im running kkr480 turbo aswell, run around about 1.3bar or 19psi daily thru it, but ive noticed mines water cooled and oil cooled..why is all the kkrs ive seen are only oil cooled? hmmmm

Not sure on that one? You must have got lucky! Good luck with yours, hope it stays together...

post the bits back to them with a thank you card. that is a heap of crap. it looks to me like it failed in part due to the cheap arse materials. I mean look at the way the compressor cover backing plate has just exploded. what a piece of junk.

yeah i think he has got something to do with them in a big way - ever noticed how hpi started pushing all things otomoto?

preety sure he is a member on here aswell and might be able to hook you up cause it dosent look too good having the hpi project car with the turbo that they push have a massive failure

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...