Jump to content
SAU Community

Recommended Posts

Hey guys, I have a mate who have a R32 GTR and something happen!

He was driving on first gear and floor the accelator until around 5-6 thousand RPM and he heard a "Pop" sound and the engine lost power not able to rev above 3000rpm and soon after his car stall. When he try starting, the engine does start but doesn't last long.

When trying to start after that, we saw black smoke from the exhaust.

Got a tow truck instead to tow it back home.

So we know that something has crack. But we do not know what exactly is it?

Does anyone have the same incident? Does anyone knows what really went wrong?

Exhaust manifold crack???

Engine Blow? ( I hope not...but if engine was to blow, smoke will be out. but there isn't any smoke from the engine)

what we know is that the exhaust is shooting out black smoke when we try to start the car with some depression on the accelator.

Need some ideas and experience suggestions.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/191809-r32-gtr-problem/
Share on other sites

Guys, my mate has got it check and the car can idle without stalling only when he pull out the 2 switches that are attached to the AFM.

And the car goes into lean mode i suppose. cant rev above 2.5 thousand RPM.

Any ideas????

Electronics problem?

Replace AFM?

or what?

Need help seriously. haha...

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/191809-r32-gtr-problem/#findComment-3451777
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...