Jump to content
SAU Community

Recommended Posts

spotted on anzac avenue a white r34, with clear tailights, nice BOV, plates were 22d jv2 or something (( nsw plates) followd behind in the mercedes, before u pulled into hungry jacks :thumbsup:

White R33 GTS-T with Chrome Rims parked next to Supercheap on Logan Rd

At the lights across from Supercheap was a

Black R33 GT-R at 11amish

Bayside Blue R34 GT-T with CBF bonnet and white rims(rays.. possibly)... at 1pmish near Greenslope hospital

White R33 GTS-T with Silver GTC's parked at the suspensions/mechanics/poster place on New Cleveland Rd. (work there?... saw it twice at 1:30pm and 2:30pm)

Silver R34 4 Door turning onto redland bay rd at the lights across from Capalaba Park at 2:47pm.

Saw couple of 'liners out today!!

I followed a Silvier R33 SLY - 64 (maybe SLY -46) on the way from deception bay to strathpine this morning

Tonight i Followed a Nice R33 GTR in white from kedron to northlakes at 6pm

Then got a wave from a guy in a nice S14 while stuck in traffic on the bruce highway near burbengary at 6.20

Also a Red R32 went by 2 lanes away from me at Uhlmann rd exit at morayfield while i was stuck in traffic

I was in the Black R32 4 door NSS13 :down::):P

spotted a clean looken r33 white with silver mesh looken rims at some 1's house in lansbrough u live near my mate if its any1 here near a train line if it helps and another up the road for sale bit dogey looken

also spotted a few round about in the valley last nite... some had sau stickers on

and 2 r32's racing of alll places down the motar way no plates on either car.... smart thing to do with a crowded highway and spotted a coupple r33's and 1 r34 in moobah this arvo

Bayside Blue R34 GT-T with CBF bonnet and white rims(rays.. possibly)... at 1pmish near Greenslope hospital

yay finally got spotted :thumbsup: , Their SSR Speedstars aswell :down: .

Also spotter White R34 GT-T on Wellington Street around 6pm this arvo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...