Jump to content
SAU Community

Recommended Posts

Spotted Streetfame33 for most of sunday with both his cruises.

Also 8ecks at the Redcliffe Cruise

And sorry mate but didnt catch your name but another purple 33 at Summerset dam ( think you said you got about 511whp if that helps and unpainted front bar)

Spotted Streetfame33 for most of sunday with both his cruises.

Also 8ecks at the Redcliffe Cruise

And sorry mate but didnt catch your name but another purple 33 at Summerset dam ( think you said you got about 511whp if that helps and unpainted front bar)

:)

spotted yet another gympie fuckwit with a fake gtr badge. maroon 33 with a lip spoiler and a big spoiler as well. that takes the tally to 2 x 33s and 2 x 34's with fake gtr badges in gympie. that would be close to 50% of all the skylines here having fake gtr badges. the next one i see i'm going to yell at for being such a stooge

And sorry mate but didnt catch your name but another purple 33 at Summerset dam ( think you said you got about 511whp if that helps and unpainted front bar)
That sounds an awful lot like Troy / mushroom :)
was it a wagon jase?

also spotted a red r32 and a black 33 and another white r33 headen into palmwoods this arvo??

Nah, was a sedan - and had what looked to be a pretty good lookin chick drivin it :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...