Jump to content
SAU Community

Rb30 Front Diff Adaptor Plate

GTS4WD
 Share

Recommended Posts

GTS4WD Grand Master

GTS4WD

Posted
Posted

Hay guys..

Im doing a 25/30 conversion and Im looking for a sump adptor plate for an RB30 so as it will mate up to my front diff.

I know there is such a thing.

Does anyone have one?

How much?

Where from?

And how does it acctually work? If the wholes in the diff dont mate up to the holes in the bottom end, how do they get them to mate?

Cheers guys!

Link to comment
https://www.sau.com.au/forums/topic/192693-rb30-front-diff-adaptor-plate/
Share on other sites
N1GTR Grand Master

N1GTR

Posted
Posted

Ive got one

I think its from Pro Engines in Canberra, or it could be the Fitzpatrick Speed Works one. I know that sounds wierd, but its one of those things you pay for and never see, you know what i mean :)

GTS4WD Grand Master

GTS4WD

Posted
  • Author
Posted

WHAT!?! $900!?!?!?!

For that price you'd almost expect an LSD to be thrown in as a free-bee!

Thanks for the imput guys!..

a couple of PM's have been sent.. so Ill have to see whats happening..

I just think that $900 is a stupendus amount of money!

Much appreciated fellas!

Been awesome help!

:huh:

Beer Baron Grand Master

Beer Baron

Posted
Posted

well personally I reckon $900 is pretty bloody reasonable. have you ever seen a sump adapter? have any idea of the work they have put into developing and then producing it?

GTS4WD Grand Master

GTS4WD

Posted
  • Author
Posted
well personally I reckon $900 is pretty bloody reasonable. have you ever seen a sump adapter? have any idea of the work they have put into developing and then producing it?

Thats why it pays to shop around.. :)

thats why the thread was started.. and Shanes a good bloke :D

I just think.. $900 is a STUPIPD amount of money.. Especially for a uni kid!.. I figure.. with $900 I could get an awesome system! A re-tune, a shitload of random bits and peices - Seats, suspension goodies, guages etc. etc. etc. chip in a few hundred more.. and I got a Power FC, LSD, Coilovers, Brakes..

It just seems so much more practicle to spend that amount of money on other peices.

GTS4WD Grand Master

GTS4WD

Posted
  • Author
Posted (edited)

How many of the holes do aligne?

And with an adaptor plate.. if you put a place something between the block and the diff.. it will raise the block, or lower the diff. According to which one it does, it will play around with geometry of the front drive shaft and miss aligne it.

How do these adaptor plates work? Is it just a different diff housing?

what about re-drilling into the block/housing so as they to align?

Edited by GTS4WD
Beer Baron Grand Master

Beer Baron

Posted
Posted

dude they have nothing to do with the diff at all. they go between the sump and the block. the diff does not sit under the block mate. it's beside the block. basically it allows you to bolt a GTR/GTS4 sump to a 30 block. again, the diff is not really in this equation at all except that the diff housing is integrated into the sump (hence the need to fit your original sump to a new block).

proengines Rising Star

proengines

Posted
Posted
WHAT!?! $900!?!?!?!

For that price you'd almost expect an LSD to be thrown in as a free-bee!

Thanks for the imput guys!..

a couple of PM's have been sent.. so Ill have to see whats happening..

I just think that $900 is a stupendus amount of money!

Much appreciated fellas!

Been awesome help!

:)

$900 is a fair bit of money, depends how much you value your own time. For $900 you get an adaptor plate that fits, the bolt holes are drilled, tapped and countersunk in a CNC mill, a silicone relief is milled in the plate, the same design as the original sump so it actually does seal oil, you get every fastener needed to bolt it all up, laser cut steel templates to notch the block, a pickup that fits inside the sump, so no need for complicated external pickups even detailed instructions on how to fit it.

Then again, you could buy a piece of 10mm steel plate for $30, a bench drill at super cheap for $50 and a piece of chalk and do it yourself... It sounds like a lot of money until you try to do it yourself. A few people on this forum or gtr.co.uk have bought them and seem quite happy with them.

post-8303-1194863983_thumb.jpg

post-8303-1194864032_thumb.jpg

Maybe I should add a sticker with some catchy jengrish phrase like "The joy of sump bolting" and make it $1000 :blush:

s13_Skyline_inside Proficient

s13_Skyline_inside

Posted
Posted (edited)

900 is pretty good if ask me, as said by pro engine, consider the time etc to make one, cnc machined quality and all the bit included, not to mention it 100% works by sealing the oil and its strong, have a look at the bottom of an rb26 block and then look at the bottom of your rb30 block, then think about making one that will actually seal and be as strong yourself at home, and yeh i think they're about 10mm thick so it's lower your sump 10mm and that means lowering your diff so yeh the drive shafts will be missaligned and put more pressue on the cv joints. so you might want to raise the engine from the mounts by 10mm to keep the sump where it was orignally and yes you probably will have clearance issue's up top given the extra 30mm extra up top the rb30 block has over other rb engines. :(

(biggest turn off doing the conversion in a gtr not a gtt/gtst :domokun: )

Edited by s13_Skyline_inside
Scooby Veteran

Scooby

Posted
Posted (edited)
Maybe I should add a sticker with some catchy jengrish phrase like "The joy of sump bolting" and make it $1000 :ermm:

Having seen the Proengines kit I can tell you it is excellent. Remember also that you will soak up a lot of time and money rooting about if you go with an external pick up unless you've got access to someone that has done it before, so effectively the plate is only $550 or so.

Greg I think we need to work on your Japlish. For example 'The strong freedom of the rising sump power, you feel' is more accurate. :D

Edited by Scooby
R34GTFOUR Mentor

R34GTFOUR

Posted
Posted
900 is pretty good if ask me, as said by pro engine, consider the time etc to make one, cnc machined quality and all the bit included, not to mention it 100% works by sealing the oil and its strong, have a look at the bottom of an rb26 block and then look at the bottom of your rb30 block, then think about making one that will actually seal and be as strong yourself at home, and yeh i think they're about 10mm thick so it's lower your sump 10mm and that means lowering your diff so yeh the drive shafts will be missaligned and put more pressue on the cv joints. so you might want to raise the engine from the mounts by 10mm to keep the sump where it was orignally and yes you probably will have clearance issue's up top given the extra 30mm extra up top the rb30 block has over other rb engines. :D

(biggest turn off doing the conversion in a gtr not a gtt/gtst :( )

i dont think the 10mm would make that much difference to the cvs, cause at the end of the day thats what they are designed to do, otherwise everytime there was travel in the suspension or anyone that lowered a gts4/gtr would be snapping shafts left right and centre

i'll most likely get one of these kits as soon as my build date gets a bit closer :O

GTS4WD Grand Master

GTS4WD

Posted
  • Author
Posted
Stupid amount of money for a uni kid?

So why try build a 25/30 into a 4WD if your a "uni kid" that 'cant afford'

You either pay good money for good work, or mediocre money for shit :ninja:

Alright.. settle down.. No need to get ur panties in a twist.. :O Its just alot more than I expected it to be.

I work hard for my money so why not spend it on something I enjoy?..

hmm.. theres been some good points raised guys!

Definately worth thinking about..

Its alright.. its just gonna take me a little longer to finish the build.. :( no worries..

Thanks again guys!.. And feel free to add more ideas/criticism im just sorting out my parts and ideas for the build.. so every bit helps.. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • Dose Pipe Sutututu
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Dose Pipe Sutututu · Posted

      Welcome back brother 
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...